Datasheet

Storage Controller 4HDD Models HP Embedded SATA RAID Controller (integrated into the south-bridge)
supporting SW RAID 0,1,10
NOTE: Transfer rate up to 3.0 Gb/s SATA.
HP Smart Array B110i SATA RAID
NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i
SATA Raid controller, To enable use of the B110i, enter the ROM based
setup utility(RBSU). The option for enabling RAID can be found in the
Advanced section of the RBSU.
8HDD Models HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
12HDD Models HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE: A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install storage controller
drivers during a Windows operating system installation from a CD.
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade
(P/N: 516471-B21) is required to enable RAID 6, 6+0
Storage Diskette Drives Via USB only
Optical Drives Optional HP Slim SATA DVD-ROM Optical Drive
Optional HP Slim SATA DVD RW Optical Drive
NOTE: Support in 4, 8, and 12 drive models . Optical drives can only be
installed in 12 drive model with rear option kit (515826-B21).
Drive Bays Up to 14 Hot Plug SAS/SATA 3.5" drives
NOTE: 4 Drive Models are Non-Hot Pluggable. Smart Array Controller must
be added for Hot Plug drive capability. 4 Drive Models can be upgraded
with the addition of a Smart Array Controller and a SAS/SATA Multi-lane
cable (496013-B21).
NOTE: The addition of a Smart Array Controller requires the addition of a
SAS/SATA Multi-lane cable (496013-B21).
Maximum Internal Storage Hot Plug SATA 14.0TB 14 x 1TB
Hot Plug SAS 14.0TB 14 x 1TB
QuickSpecs
HP ProLiant DL180 Generation 6
Standard Features
DA - 13248 Worldwide QuickSpecs — Version 7 — 7.13.2009 Page 6