Hot Swappable Power Supply Ordering Guide for HP A5800-48G-PoE+ Switch with 2 Interface Slots Part number: 5998-1958 Document version: 6W100-20110408
Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Contacting HP For worldwide technical support information, see the HP support website: http://www.hp.com/support Before contacting HP, collect the following information: • Product model names and numbers • Technical support registration number (if applicable) • Product serial numbers • Error messages • Operating system type and revision level • Detailed questions Subscription service HP recommends that you register your product at the Subscriber's Choice for Business website: http://www.hp.
Hot Swappable Power Supply Ordering Guide Power supply overview Adopting advanced power supply design, the HP A5800-48G-PoE+ Switch with 2 Interface Slots (hereafter referred to as A5800-48G-PoE+ (2 slot)) and HP A5800-48G-PoE+ TAA Switch with 2 Interface Slots (hereafter referred to as A5800-48G-PoE+ TAA (2 slot)) features the following: • Adopting hot swappable power supply design, each switch providing two hot swappable power supply slots, as shown in Figure 1.
Model PSR300-12D1 (JC090A) PSR750-A (JC089A) Power supply mode –48 VDC equipment-room power supply (Rated voltage range: –48 VDC to –60 VDC) HP A-RPS1600 (JG136A) DC power supply (Rated voltage range: –52 VDC to –55 VDC) AC input (Rated voltage range: 100 VAC to 240 VAC; 50 Hz or 60 Hz) 2
Guide to purchase Table 2 Hot swappable power supply configuration of the A5800-48G-PoE+ (2 slot)/A5800-48G-PoE+ TAA (2 slot) Model (Slot 1) Model (Slot 2) 30 W PoE 15.
