- Hewlett-Packard Network Router User Manual

maxnode contains the maximum number of nodes per network area.
maxvisit contains the maximum number of times a packet can pass
through the same router.
nmaxcst contains the maximum node-to-node transit cost.
nmaxhop contains the maximum number of hops that a packet can
transit from source to destination.
node contains the router’s
DECnet node number.
state contains the router state: 1 indicates that the router is enabled
and forwarding packets; 2 indicates that the router is disabled.
Interface Specific
cost contains the relative circuit cost assigned to the interface.
cname contains the name of the circuit group that enables the
DECnet interface.
htime contains the time interval between
DECnet hello packets.
index contains the router-assigned interface number.
numrtr contains the number of routers associated with the interface.
rprior contains the router priority.
state contains the interface state: 1 indicates that the router is
enabled and forwarding packets; 2 indicates that the router is disabled.
Management Information Base Variables
decnet: DECnet Configuration Information Base
18-54