LASERJET ENTERPRISE 600 M601, M602, AND M603 SERIES PRINTER Software Technical Reference
HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer Software Technical Reference
Copyright and License Trademark Credits © 2011 Copyright Hewlett-Packard Development Company, L.P. Adobe®, Adobe Photoshop®, Arobat®, and PostScript® are trademarks of Adobe Systems Incorporated. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Corel® is a trademark or registered trademark of Corel Corporation or Corel Corporation Limited. The information contained herein is subject to change without notice.
Table of contents 1 Product basics and Windows software description ............................................................ 1 Purpose and scope ................................................................................................................... 2 Software availability and localization ......................................................................................... 2 Printing-system software on the Web ...........................................................................
HP Print View Software ........................................................................................................... 24 2 Install Windows software and utilities ............................................................................ 25 Introduction ........................................................................................................................... 25 Supported operating systems for Windows .............................................................................
Use defined printing shortcuts ................................................................................... 60 Create a custom printing shortcut .............................................................................. 60 Paper/Quality tab features ...................................................................................................... 61 Paper Options ........................................................................................................ 62 Paper sizes ...........
Pages per sheet ....................................................................................... 84 Print Page Borders .................................................................................... 84 Page Order ............................................................................................. 84 Document preview image ......................................................................................... 85 Orientation ..............................................................
Allow Manual Duplexing ......................................................................... 102 Printer memory ....................................................................................... 102 Printer Hard Disk .................................................................................... 102 Job Storage ........................................................................................... 102 Secure Printing .........................................................................
Marketsplash by HP ................................................................................ 131 Commands ............................................................................................ 131 Printer Settings ...................................................................................................... 132 Supplies Management ............................................................................ 132 Economode & Toner Density ...................................................
List of tables Table 1-1 Installer CD languages ............................................................................................................ 4 Table 1-2 Supported print driver languages ............................................................................................. 7 Table 1-3 Installer component languages ................................................................................................. 8 Table 1-4 Documentation languages .......................................
x ENWW
List of figures Figure 1-1 Accessing User Guide from Windows Start menu ...................................................................... 4 Figure 1-2 Installer CD documentation screen ........................................................................................... 6 Figure 1-3 About tab ......................................................................................................................... 13 Figure 2-1 Software installation — License agreement screen .....................
Figure 3-5 Paper/Quality tab .......................................................................................................... 61 Figure 3-6 Paper Options group box ................................................................................................ 62 Figure 3-7 Custom Paper Size dialog box ........................................................................................ 63 Figure 3-8 Special Pages dialog— Covers ...............................................................
Figure 4-25 HP Utility — Trays Configuration screen .................................................................... 135 Figure 4-26 HP Utility — Output Devices screen ............................................................................ 136 Figure 4-27 HP Utility — Duplex Mode screen ............................................................................... 136 Figure 4-28 Protect Direct Ports screen ...........................................................................................
xiv ENWW
1 Product basics and Windows software description The chapter provides information about these topics: ENWW ● Purpose and scope ● Software availability and localization ● Windows printing-system software ● Driver configuration for Windows ● Use the HP Embedded Web Server ● Use HP Web Jetadmin software ● HP ePrint ● HP Print View Software 1
Purpose and scope This software technical reference (STR) provides information about, and troubleshooting tips for, the printing-system software for the product. This STR is prepared in an electronic format to serve as a quick-reference tool for Customer Care Center (CCC) agents, support engineers, system administrators, management information systems (MIS) personnel, and end users, as appropriate.
HP LaserJet software CD, Windows partition NOTE: For information about the contents of the Macintosh partition of the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system software CD, see HP LaserJet software CD, Macintosh partition on page 111. The root directory in the Windows partition of the software CD contains the AUTORUN.EXE file, the SETUP.EXE file, and the following directories: ● Drivers NOTE: The file hpcm600c.inf is for a 32-bit install and hpcm600u.
The User Guide can be found in the Start menu by clicking Start\All Programs\HP\HP LaserJet 600 M601 M602 & M603. Figure 1-1 Accessing User Guide from Windows Start menu The User Guides can also be found on the hard disk here: ● \\CD ROOT\Documents\program files\HP\HP LaserJet 600 M601 M602 M603\Help_Learn One of the following 30 languages will be installed automatically.
Table 1-1 Installer CD languages (continued) Language iso4lang Estonian (Esti) etww 1 Finnish (Suomi) fiww Greek elww Hungarian (Magyar) huww Bahasa Indonesian idww Japanese jaww Kazakh kkww 1 Korean koww Latvian (Latviesu) Lithuanian (Lietuvislai) 1 ltww Norwegian (Norsk) noww Polish (Polski) plww Portuguese (Portugues) ptww Romanian (Romana) roww Russian ruww Serbian srww 1 Slovak (Sloveneina) skww Slovenian (Slovenseina) slww Swedish (Svenska) svww Thai thww T
When the in-box software Installer CD is run, the user guide can be viewed by clicking More Options, Documentation, then User Guide (CD). The Installer CD screen is shown in Figure 1-2 Installer CD documentation screen on page 6.
Driver languages The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product provides driver support in the following languages.
Installer languages The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product provides installer component support in the following languages. Table 1-3 Installer component languages 8 Component Language list Administrator install ● Arabic ● Korean Common Windows Installer ● Bahasa Indonesian ● Norwegian Web Registration ● Catalan ● Polish NOTE: Web Registration is run when the install is complete, and is not installed on the user's system.
Documentation languages The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product provides documentation in the following languages. Table 1-4 Documentation languages Component ● ● HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer Driver Preconfiguration User Guide (Available in English only) ● Arabic ● Korean ● Bulgarian ● Latvian ● Catalan ● Lithuanian HP JetDirect Administrator's Guide (.
Windows printing-system software This section contains information about the following topics: ● Windows printing-system software ● HP LaserJet print drivers Windows printing-system software Table 1-5 Software components for Windows Component Description HP installer Installs the printing-system software based on the hardware it detects from the host computer. Uninstaller Removes files and folders that were installed when the printing-system software was originally installed on the computer.
Operating systems supported for the print drivers HP PCL 6 discrete, HP UPD PCL 5, HP UPD PCL 6, HP UPD PS, and Mac drivers Windows XP SP 2 or greater (32-bit and 64-bit) Windows Server 2003 SP 1 or greater (32 bit and 64 bit) Windows Server 2008 (32-bit and 64-bit) Windows Server 2008 R2 (64-bit) Windows Vista (32-bit and 64-bit) Windows 7 (32-bit and 64-bit) Mac OS X 10.5, OS X 10.6 NOTE: Print driver for Mac OS X 10.
HP PCL 6 Print Driver, PCL 6 Universal Print Driver, PCL 5 Universal Print Driver, and PS Universal Print Driver All of the Windows drivers are supported by Microsoft 32-bit and 64-bit operating systems. The HP PCL 6 driver is included on the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system software CD. The PCL 6 and PCL 5 Universal Print Drivers and the PS Universal Print Driver are available for download at the following Web site: www.hp.
4. Click the About tab. Figure 1-3 About tab NOTE: The HP PCL 6 print driver is installed by default when using the installer CD. It can also be downloaded from www.hp.com with an installer or just the driver. In all cases, the driver will be listed as UPD Version 5.3.0.10295. This refers to the HP PCL 6 driver version NOT the UPD driver version as stated. This may be removed in a future version of the driver.
Driver configuration for Windows The HP print drivers feature bidirectional communication technology which, in supported environments, provide automatic discovery and driver configuration for product accessories at the time of installation. Some accessories that are automatically discovered and configured include the duplexing unit, optional paper trays, printer hard disk, and dual inline memory modules (DIMMs).
If bidirectional-communication software has been installed previously, EAC is not activated, and the pre-existing bidirectional-communication software is used to configure the print driver. If bidirectional communication software has not been installed, EAC installs bidirectionalcommunication software that allows it to communicate with the product and automatically match the print driver with the actual product configuration.
HP Driver Configuration HP Driver Configuration is a software architecture and set of tools that permits HP printing-system software to be customized and distributed in managed corporate printing environments. Using HP Driver Configuration, information technology (IT) administrators in corporate and enterprise environments can preconfigure the printing and device defaults for HP print drivers before installing the drivers in the network environment.
file and a .CAB file. These files are run on the client computer to copy the print-driver files to the Windows driver store and, for network packages, to install the product. This utility is supported on Windows XP, Windows 7, Windows Server 2003, Windows Server 2008, and Windows Vista operating systems. ● HP Web Jetadmin Driver Configuration. HP Web Jetadmin provides a queue-creation program that can be used to create printer queues on Windows XP, and Windows Server 2003.
Use the HP Embedded Web Server Use the HP Embedded Web Server to view product status, configure product network settings, and to manage printing functions from your computer instead of from the product control panel. The following are examples of what you can do using the HP Embedded Web Server: ● View product status information. ● Determine the remaining life for all supplies and order new ones. ● View and change tray configurations. ● View and change the product control-panel menu configuration.
NOTE: If the product has been configured to display its IP address on the control panel, touch How to Connect and then touch Network Address from the Main Menu to display the IP address. 2. Use the down arrow button button. to highlight the Configuration Page item, and then press the OK 3. Use the up arrow button 4. Locate the IP address or host name on the HP Jetdirect page. to highlight the Print item, and then press the OK button.
Table 1-7 HP Embedded Web Server Information tab (continued) Menu Description Print Allows uploading a file from your hard disk or network file server to be printed. The following file types are supported: Printable Reports and Pages ● .txt ● .ps ● .pdf ● .pcl ● .cht ● .prn Lists the internal reports and pages for the product. Select one or more items to print or view.
Print tab Use the Print tab to enable or disable walk-up USB printing. Jobs printed from USB will use the default print settings. the following file types are supported for walk-up USB printing: ● .pdf ● .prn ● .pcl ● .ps ● .cht Table 1-9 HP Embedded Web Server Print tab Menu Description Retrieve from USB Setup Setup Use this item to enable or disable this feature. Manage Stored Jobs Use this feature to manage jobs stored on the product memory.
Table 1-11 HP Embedded Web Server Security tab (continued) Menu Description Protect Stored Data Configure and manage the internal hard drive for the product. This product includes an encrypted hard drive for maximum security. Configure settings for jobs that are stored on the product hard drive. Certificate Management Install and manage security certificates for access to the product and the network. HP Web Services Use the HP Web Services tab to enable or disable the HP Web Services feature.
Use HP Web Jetadmin software HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and troubleshooting network-connected peripherals. Management is proactive, allowing network administrators the ability to resolve issues before users are affected. Download this free, enhancedmanagement software at www.hp.com/go/webjetadmin. NOTE: HP Web Jetadmin is not supported from Mac OS X.
d. To prevent your product from printing unexpected documents, click ePrint Settings, and then click the Allowed Senders tab. Click Allowed Senders Only, and add the e-mail addresses from which you want to allow ePrint jobs. e. To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click Print Options, and select the settings that you want to use.
2 Install Windows software and utilities Introduction The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product comes with software and installers for Microsoft Windows and Apple, Inc., Macintosh systems. Linux and UNIX systems are supported, and software is available on the Web. This chapter provides procedures for installing and removing the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system software for Windows operating systems.
Supported operating systems for Windows Windows operating systems provide full-featured support for the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product. Operating systems that are not described here provide varying levels of functionality. Windows XP is used to denote Windows XP Home Edition, Windows XP Professional, and Windows XP Media Edition unless noted otherwise.
NOTE: The installer CD will run on both operating systems. ● Same system requirements for running the supported Windows operating system (OS) ● Latest operating system updates installed through Windows Update ● 200 MB of available hard-disk space ● Mac OS X v10.5, v10.6, and v10.7 (v10.
28 ● HP WJA (Web Jetadmin – used in large/managed environments to manage printers, deploy drivers, update firmware, etc.): www.hp.com/go/webjetadmin ● HP ePrint: www.eprintcenter.com ● HP ePrint Mobile driver: www.hp.com/go/eprintmobiledriver ● Mac Airprint: www.hp.
Install overview The software for the product comes on a single CD. The software installer first checks the versions of Windows Installer and Microsoft .NET installed on the system, and then installs the printing-system software from the CD onto the hard disk and updates Windows files.
Installation options The printing-system software can be used with the product in the following configurations: ● Install the printing-system software on a computer that is directly connected to the product through a USB port. ● Install the printing-system software on a computer that has access to a wired network to which the product is connected. NOTE: A wireless option can be purchased separately.
Detailed Microsoft Windows installation instructions The dialog boxes shown here appear in the Windows XP Professional installation sequence. The order and appearance of dialog boxes can vary among operating systems. Use the installation CD to install the product software The recommended Easy installation installs the PCL 6 print driver and user guide. ● For a USB installation, do not connect the USB cable between the product and the computer yet.
3. Read the license agreement, click the I have reviewed and accept the installation agreements check box, and then click the Next button to continue to the Connection Type screen. Figure 2-1 Software installation — License agreement screen 4. 32 The Preparing to Install screen appears. It may take several minutes before the installer proceeds to the next screen.
5. Select a connection type option on the Connection Type screen, based on how the product connects to the computer. ● For USB-connected products, follow these steps: a. Select Directly connect to this computer using a USB cable. and then click Next.
b. Connect the product to the computer when prompted at the Connect your Product now screen. The installer program opens a progress bar as it automatically starts the software installation.
● For wired network connected products, follow these steps: a. Select the Connect through a wired network option. Figure 2-4 Software installation — Connection Type screen for network connected installation b. If the product's network settings are not known, select the Automatically find my product on the network option. c. If the product's networking settings are known, enter either the product's host name, IP address, or hardware address.
e. A list of products is displayed on the Network Product(s) Found screen. Select the product to install and then click the Next button. Figure 2-5 Software installation — Network Product(s) Found screen 6. The Product Configuration screen appears. Figure 2-6 Software installation — Product Configuration screen 36 ● Make this product the default printer by selecting the Set as default printer check box. ● Send a test page to the product by selecting the Print a test page check box.
7. Click the Next button to proceed to the Enable HP Web Services screen. Figure 2-7 Software installation — Enable HP Web Services screen ▲ Select the check box next to Yes, open my Web browser to enable HP Web services for my printer. to navigate to an HP web site and set up the Web services HP ePrint for your product. When Web Services are enabled, ePrint information appears in the HP Embedded Web Server. Look for the e-mail address that is automatically assigned to the product.
8. 38 d. To prevent your product from printing unexpected documents, click ePrint Settings, and then click the Allowed Senders tab. Click Allowed Senders Only, and add the e-mail addresses from which you want to allow ePrint jobs. e. To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click Print Options, and select the settings that you want to use. Click the Finish button to complete the installation and exit the installer.
Install optional software If you chose not to install optional software during the initial software installation but want to do so later, complete the following steps. 1. Insert the printing system software CD into the CD-ROM drive. The software installer detects the language of the operating system, and then displays the main menu of the installation program in the same language. If the installer program has not started after 30 seconds, complete these steps: a. On the Start menu, click the Run option.
2. Click the More Options button to open the More Options screen. Figure 2-9 Software installation — More Options screen 3. Click one of the following buttons to open a corresponding screen with various options. ● Documentation screen: This screen provides links to the user guide on the product software CD, the online user guide, and the product readme file.
● Admin Documentation screen: This screen provides a link to the HP Driver Configuration Utility User Guide. Figure 2-11 Software installation — Admin Documentation screen ● Admin Software screen: This screen provides links to the HP Universal Print Driver Portal, the HP Web Jetadmin utility, the HP Driver Deployment utility, and the HP Driver Configuration Utility.
● Get Specialized Drivers screen: This screen provides links to the HP Universal Print Driver Portal and HP Print View software. Figure 2-13 Software installation — Get Specialized Drivers screen ● Web Support screen: This screen provides a link to the product support Web page for your product. Figure 2-14 Software installation — Web Support screen 42 4. Click the Back button to return to the More Options screen. 5. Click the Cancel button to close the installer program.
Uninstall software NOTE: If the print driver was installed by using the HP Driver Installation Utility, follow the instructions in the Remove the print driver by using the Windows Add or Remove Programs feature on page 48. If the driver was installed using the Add Printer Wizard, follow the instructions in the Uninstall the print driver by using the Server Properties feature on page 50.
3. Click the Uninstall button to begin the removal process. When the process is complete, either click the Reboot Now button, or clear the check box and click the Reboot Later button.
Use the software CD to remove the product software The installer program on the software CD includes a utility to remove the product software 1. Insert the printing system software CD into the CD-ROM drive. The software installer detects the language of the operating system, and then displays the main menu of the installation program in the same language. If the installer program has not started after 30 seconds, complete these steps: a. On the Start menu, click the Run option. b.
2. Click the Uninstall option, and then click the Next button. Figure 2-19 Software installation — Uninstall option selected 3. Click the Uninstall button, and then follow the onscreen instructions to complete the process.
4. Click the Uninstall button to begin the removal process. When the process is complete, either click the Reboot Now button, or clear the check box and click the Reboot Later button.
Remove the print driver by using the Windows Add or Remove Programs feature If the print driver was installed by the HP Driver Installation Utility (HP DIU), perform the following to uninstall the driver: NOTE: You do not need the printing-system software CD to use this uninstall method. NOTE: To uninstall the software, you must log on with Administrator privileges. 1. Close all programs. 2. Complete one of the following steps.
4. The HP Driver Uninstall Utility launches. Click the Uninstall button to start the uninstall process. Click Cancel to exit the HP Uninstall Utility. Figure 2-24 HP Driver Uninstall Utility screen 5. When the removal is complete, you will be prompted to reboot the computer. De-select the checkbox to reboot at a later time.
Uninstall the print driver by using the Server Properties feature If the print driver was installed by the Add Printer Wizard, perform the following to uninstall the driver: NOTE: To uninstall the software, you must log on with Administrator privileges. 1. Close all programs. 2. On the Start menu, do one of the following steps: 3. ● Windows XP and Windows Server 2003: Click the Settings item, and then open the Printers and Faxes item.
3 HP PCL 6 print driver for Windows Introduction This chapter describes the features of the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer PCL 6 Print Driver for, Windows XP (32-bit), Windows Server 2003 (32-bit), Windows Server 2008 (32-bit and 64-bit), Windows Vista (32-bit and 64-bit), and Windows 7 (32-bit and 64-bit).
● About tab features Change the print driver settings for Windows Operating System To change the settings for all print jobs until the software program is closed To change the default settings for all print jobs To change the device configuration settings Windows 7, XP, Server 2003, Server 2008, and Vista 1. On the File menu in the software program, click Print. 1. 1. 2. Select the driver, and then click Properties or Preferences. The steps can vary; this procedure is most common.
In Windows Vista, Server 2003 and XP click Properties, in Windows 7 and Server 2008 click Printer Properties, after right-clicking the device name to gain access to the Properties tab set, which controls the driver behavior and driver connections. Properties tab set The Properties tab set contains information about and options for configuring the product. NOTE: Windows also has tabs in the Properties or Printer properties tab set.
Help system The HP PCL 6 Print Driver includes a full-featured Help system to provide assistance with printing and configuration options. HP Printer Help Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista, and Windows 7 support HP Printer Help . You can gain access to HP Printer Help messages in any of the following ways: ● Right-click a feature or control. A pop-up Help window appears. ● Click a feature or control, and then press the F1 key.
Advanced tab features NOTE: The Advanced tab is located on the Printing preferences tab set. Use the Advanced tab to change the layout of printed pages. Use this tab to configure special controls that are not commonly used, as well as to control features such as collating and copies in the driver (although most current software programs support these features in the print dialog box or through the page settings in the software program). The following figure shows the Advanced tab.
Copy Count Copy Count specifies the number of copies to print. This driver setting is useful for software programs that do not provide a copy count. If a copy count is available in the software program, set the copy count in the software program. The number of copies that you request appears in the Copy Count option. You can select the number by typing in the text box or by using the up and down arrows to the right of the text box. Valid entries are numbers from 1 to 9999.
Advanced Printing Features When the Advanced Printing Features setting is Enabled, metafile spooling is turned on and Finishing tab options such as Page Order, Booklet Layout, and Pages per Sheet are available, depending on your product. Enhanced metafile spooling is used to greatly reduce the amount of time that elapses between a request to print (initiated by an application) and the return of control to the application by the operating system.
When this option is selected, you must use one of the following options in the Paper type setting: ◦ Letterhead ◦ Preprinted NOTE: Because Alternative Letterhead Mode is available only if the product is equipped with an automatic duplexing unit, the the base model (HP Laserjet Enterprise 601n) does not support this option. Layout Options The Layout Options setting contains the Page Order setting. Page Order specifies the order in which the pages of your document are printed.
Printing Shortcuts tab features ● Use defined printing shortcuts ● Create a custom printing shortcut NOTE: The Printing Shortcuts tab is located on the Printing preferences tab set. Use the Printing Shortcuts tab to store specific combinations of driver settings for easy use. The following figure shows the Printing Shortcuts tab. NOTE: The number of options shown (Paper sizes, Paper source, etc) changes depending on the selected shortcut.
● Create a custom printing shortcut Use defined printing shortcuts The following defined printing shortcuts are available: ● Factory Defaults ● General Everyday Printing. Select this option to print using typical settings. ● Envelopes. Select this option to print using typical settings for booklet printing. ● Cardstock/Heavy. ● Labels ● Transparencies ● EcoSMART Settings. Select this option to print using typical settings for duplex printing.
Paper/Quality tab features NOTE: The Paper/Quality tab is located on the Printing preferences tab set. Use the Paper/Quality tab to specify paper size, type, and source. You can also use this tab to specify different paper selections for the front cover, first page, other pages, last page, and back cover of the document. The following figure shows the Paper/Quality tab.
Paper Options The settings specified in the Paper Options group box on the Paper/Quality tab apply to all of the pages of the document. The following figure shows the Paper Options group box and the selections that are available by default.
When the Settings under the Special Pages section have been changed, the Paper sizes, Paper source, and Paper type menus change also, offering a variety of options. For more information, see Special pages on page 68. Custom Paper Size The Custom Paper Size dialog box appears when you click Custom… on the Paper/Quality tab. The following figure shows the initial appearance of the Custom Paper Size dialog box.
Paper size The width and height values can be changed by typing numeric strings into the edit boxes in the Paper Size group box. Any entry that is greater than the maximum limits of the width and height control is rounded down to the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height control is rounded up to the minimum valid entry. If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest whole millimeter.
Table 3-1 Supported paper and print media sizes (continued) Size and dimensions Tray 1 Tray 2 and the optional 500sheet trays Optional 1,500-sheet tray Optional envelope feeder Optional duplexer Optional stacker and stapler/ stacker Optional 5-bin mailbox 8.5 x 13 216 x 330 mm (8.5 x 13 in) (Stacker only) B5 (JIS) 182 x 257 mm (7.17 x 10.12 in) (Stacker only) Double Postcard (JIS) 148 x 200 mm (5.8 x 7.9 in) 16K 197 x 273 mm (7.8 x 10.8 in) (Stacker only) Custom 76 x 127 mm to 216 x 356 mm (3.
Table 3-1 Supported paper and print media sizes (continued) Size and dimensions Tray 1 Tray 2 and the optional 500sheet trays Optional 1,500-sheet tray Optional envelope feeder Optional duplexer Optional stacker and stapler/ stacker Optional 5-bin mailbox Envelope B5 ISO 176 x 250 mm (6.92 x 9.84 in) Envelope Monarch #7-3/4 98 x 191 mm (3.9 x 7.5 in) 1 Custom sizes cannot be stapled, but they can be stacked in the output bins.
Paper source The Paper source setting specifies the source tray to use for printing a document. The list of source trays depends on the product accessories that are installed. Any optional source trays that are installed through the Device Settings tab also appear here.
◦ Envelope ◦ Preprinted ◦ Prepunched ◦ Colored ◦ Rough ◦ Retail Shelf Edge Labels The default setting is Unspecified. No mechanism exists for manually adding custom paper types through the driver. Use HP Web Jetadmin to add custom paper types. Custom types can be added only by using bidirectional communication, so they must already exist in the product when the bidirectional query occurs. If bidirectional communication is enabled, then an updated list of paper types is returned.
Covers To use specific cover settings, click Covers in the Special Pages group box. Figure 3-8 Special Pages dialog— Covers Use the Covers options to include a blank or preprinted cover on a document, or to include a front/ back cover from a source tray that is different from the one used for the remainder of the document. The following are the Covers options: ● Add a blank or preprinted cover: Select which cover is customized: Front, Back, or Both.
The following figure shows the Print pages on different paper settings and options. Figure 3-9 Print pages on different paper The following are the Print pages on different paper options: ● Pages in document. Select which pages are customized: the First page or the Last page. ● Paper source: The Paper source setting specifies the source tray to use for printing a document. The list of source trays depends on the accessories that are installed.
● Effects ● Finishing Switching between tabs does not change the location or appearance of the document preview image. When you move the mouse over the document preview image, the mouse cursor changes from an arrow to a gloved hand. You can toggle between portrait and landscape page orientation by clicking the image.
Effects tab features NOTE: The Effects tab is located on the Printing preferences tab set. Use the Effects tab to create unique paper effects such as scaling and watermarks. The following figure shows the Effects tab.
Resizing Options The Resizing Options group box consists of the following controls: ● Actual Size (default) ● Print Document On ● Scale to Fit ● % of Actual Size Actual Size Actual Size is the default setting. It prints the document without changing the document size. Print Document On Click the Print Document On option to format the document for one paper size and then print the document on a different paper size, with or without scaling the image to fit the new paper size.
preview images for a document formatted for Legal-size paper with the Print Document On check box selected, and the target size specified as Letter. Figure 3-11 Preview images – Legal on Letter; Scale to Fit off (left) and on (right) When the size for which the document is formatted (that is, the logical size) differs from the target size, the preview image uses a dashed gray line to show the boundaries of the logical page in relation to the target paper size.
document preview image appears in the upper-right corner of the following Printing preferences driver tabs: ● Printing Shortcuts ● Paper/Quality ● Effects ● Finishing Switching between tabs does not change the location or appearance of the document preview image. When you move the mouse over the document preview image, the mouse cursor changes from an arrow to a gloved hand. You can toggle between portrait and landscape page orientation by clicking the image.
Click Edit, and the Watermark Details dialog box appears. Figure 3-12 Watermark Details dialog box The dialog box shows a preview image and provides options for creating a new watermark and controlling the message angle and font attributes. Click OK to accept all of the changes that are made in the Watermark Details dialog box. However, clicking Cancel does not cancel all of the changes.
Watermark Message The Watermark Message is also the name that identifies the watermark in the Current Watermarks list, except when more than one watermark has the same message. For example, you might want several different watermarks with the message DRAFT, each with a different typeface or font size. When this occurs, the string is appended with a space, a pound sign, and a number (for example, Draft #2).
◦ Medium ◦ Medium Dark ◦ Dark ◦ Very Dark ◦ Darkest These values represent the intensity of the gray that is used. Select Light to produce a lightly saturated gray watermark. Select Lightest to produce the lightest shade of watermark. Select Darkest to produce a black watermark. ● Size Font sizes from 1 to 999 points are available from the Size menu. The default point size is language-dependent.
Finishing tab features NOTE: The Finishing tab is located on the Printing preferences tab set. Use the Finishing tab to print booklets and control the paper output. The following figure shows the Finishing tab.
● Flip Pages Up ● Booklet Layout ● Pages per sheet ● Print Page Borders ● Page Order Print on Both Sides The default setting for the Print on Both Sides option is off (not selected).
Print on both sides automatically The duplexing unit in the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product prints on two sides of a sheet of paper when the Print on Both Sides option is specified in the print job. The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product comes with a duplexing unit installed in the following models: ● M601dn ● HP LaserJet M602 ● HP LaserJet M603 These product models support smart duplexing.
Select the paper type that corresponds to the paper that you are using for the print job. The following paper types have a different print modes when you manually print on the second side: ● Plain ● Preprinted ● Letterhead ● Prepunched ● Bond ● Recycled ● Rough NOTE: To make the Print on Both Sides (Manually) check box available in the document options, select the Allow Manual Duplexing option on the Device Settings tab in the print-driver Properties tab set.
Flip Pages Up Use the Flip Pages Up check box to specify the duplex-binding option. By default, the Flip Pages Up check box is not available. It is available only when Print on Both Sides is selected. The following table demonstrates the results of selecting this check box, depending on the paper orientation selected on the Finishing tab.
A booklet is a print job that places two pages on each side of a sheet that can then be folded into a booklet that is half the size of the paper. Use the Booklet Layout drop-down menu on the Finishing tab to control booklet settings. Pages per sheet Use the Pages per sheet option to select the number of pages that you want to print on a single sheet of paper.
The preview document image changes to reflect alterations in these settings. Document preview image The document preview image is a line-drawn image of a page that represents graphics and text. The document preview image is always oriented so that the contents of the page are right-side-up.
Job Storage tab features NOTE: The Job Storage tab is located on the Printing preferences tab set or the Properties tab set. Use the job-storage feature to store print jobs in the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product memory or hard disk for printing at a later time. The Job Storage tab appears among the driver tabs only if the job-storage feature is enabled on the Device Settings tab.
5. Select Job Storage. 6. Select Disabled in the Change 'Job Storage' Setting dialog box that appears. If the job-storage feature is enabled (without installing a hard disk but with at least 288 MB of total memory), two Job Storage Mode settings are available on the Job Storage tab: ● Proof and Hold ● Personal Job Two additional Job Storage Mode settings become available on the Job Storage tab if a hard disk is installed: ● Quick Copy ● Stored Job The following figure shows the Job Storage tab.
● Status group box ● Job Storage Mode ● Make Job Private/Secure ● User Name ● Job Name ● Job Notification Options ● Use job-storage features when printing Status group box The unlabeled group box on the Job Storage tab contains a status message about the destination of a print job. The status information changes depending on the selections that are made on the Job Storage tab.
NOTE: When using the Proof and Hold option, only one copy of the print job is sent to the printer even if multiple copies are specified in the software application you print from. If multiple copies are needed while using the Proof and Hold option, they must be specified at the control panel. After it is released for printing, the proof-and-hold job is immediately deleted from the product. If more copies are needed, you must reprint the job from the software program.
NOTE: The product configuration can be set to hold a maximum of 50 quick-copy or proof-and-hold jobs. The number is set at the product control panel in the CONFIGURATION menu, and the default is 32. When this preset limit is reached, the new document overwrites the oldest held document. Also, a document that has the same user name and job name as one that is already stored on the printer hard disk will overwrite the existing document. Quick Copy jobs are deleted if you turn off the product.
PIN to print Select PIN to print from the drop-down menu, and then type a 4-digit PIN number in the box provided. The personal or stored job is sent to the product, where you must enter the 4-digit PIN on the control panel to retrieve the job. For more information on the PIN to print option, see Personal Job on page 89 Encrypt Job (with password) The new HP UPD option Encrypt Job (with password) is available for use with firmware (11.
Job Name Use the Job Name options to specify a name to identify the job at the product control panel. The following are the Job Name settings: ● This option, which is the default selection, automatically generates the job name that is associated with the stored print job. The file name of the print job is used if it is available to the print driver. Otherwise, the software program name or a time stamp is used for the job name. ● Custom.
Use job-storage features when printing To use job-storage features when printing, follow these steps: 1. Click File, and then click Print from the software program. The Print dialog box appears. NOTE: Clicking the print icon in the software program toolbar prints the job without using jobstorage features. 2. Click Properties or Preferences. The Properties dialog box appears. NOTE: The label for the button that opens the Printer Preferences dialog box varies between software programs.
Delete a job-storage print job Sometimes it is necessary to delete a print job from the printer hard disk. You can do this from the product control panel. 1. Press the Home button 2. Press the up arrow or the down arrow until Retrieve Job From Device Memory is highlighted on the product control panel, and then press OK. 3. Press the up arrow or the down arrow to scroll to your user name, and then press OK. 4. Press the up arrow or the down arrow to scroll to the job name, and then press OK. 5.
Services tab features NOTE: The Services tab is located on the Printing preferences tab set. The Services tab is shown in the following figure.
Internet Services The Internet Services group box contains the Select a destination drop-down menu with the following selections: ● Online diagnostic tools. This is the HP Instant Support Web site, where you can find interactive tools and contacts for troubleshooting. ● Support and troubleshooting. This is the main Web site for HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product support. ● Product manuals.
Device Settings tab features NOTE: The Device Settings tab is located on the Properties tab set. Available options depend on the feature. The following figure shows the Device Settings tab. Figure 3-18 Device Settings tab The Device Settings tab contains controls for paper-handling devices and controls for managing the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product.
This constraint prevents (or reduces the likelihood of) tying up the product with paper-mount messages that occur when users request sizes or types that are not available. The trays listed in the Form to Tray Assignment setting include standard trays and optional accessory trays. Generally, items that are installed separately have a separate Installable Options setting. The input trays listed here are also listed as paper sources on the Paper/Quality tab. Configuring the trays 1.
External Fonts Use the External Fonts option to install and remove external fonts for the product. External fonts can be soft fonts or DIMM fonts. Click the External Fonts option to make the Properties button available. Click Properties to open the HP Font Installer dialog box, which is shown in the following figure. Figure 3-20 HP Font Installer dialog box Installing external fonts Follow these steps to install external fonts. 1.
Removing external fonts 1. In Windows Vista and Windows 7, click the Start button, click Control Panel, click Hardware and Sound, and then click Printers. In Windows XP, Windows Server 2003, and Windows Server 2008, click Start, click Settings, and then click Printers and Faxes. 2. Right-click the name of the product. 3. Click Properties or Printer properties. 4. Click the Device Settings tab. 5. Click the External Fonts option. The Properties button appears. 6. Click Properties.
● Secure Printing ● Job Separator ● Mopier Mode Automatic Configuration Use the Device Settings tab to tell the driver about the hardware configuration of the product. If bidirectional communication is enabled in a supported environment, update this tab by selecting the Update Now setting in the Automatic Configuration setting. The default setting is Off. After an automatic configuration, the setting returns to Off after the changes are made.
Envelope feeder A paper-handling accessory that holds up to 75 envelopes. Accessory output bin Provides an additional output bin that holds 500 sheets. Duplex Unit (for 2-Sided Printing) The duplexing unit comes installed on the HP LaserJet M602 and the HP LaserJet M603 product models. NOTE: The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer product supports smart duplexing.
Setting this to disabled results in the setting Encrypt Job not to be listed under Make Job Private/ Secure on the Job Storage tab. The default is Automatic, enabling the setting to be selected from the Job Storage tab. Job Separator Use this control to specify whether a print job identifier page should be printed between print jobs. The Job Separator feature is disabled by default.
The following table shows the relation between mopier mode settings and collation settings in the software program and the driver. The first three columns show the settings; the last column, "Expected result", shows how a 3-page print job would appear.
About tab features NOTE: The About tab is located on the Properties tab set. The About tab provides detailed information about driver component versions. It contains an overall build version number (in parentheses after the model name) together with specific information about each of the components. The information varies according to the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer model number, driver, date, and versions. The About tab is shown in the following figure.
106 Chapter 3 HP PCL 6 print driver for Windows ENWW
4 Mac OSX software and utilities Introduction The HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer comes with software and installers for Apple, Inc. Macintosh systems. This chapter provides procedures for installing and removing the HP LaserJet Enterprise 600 M601, M602, and M603 Series Printer printing-system software for Macintosh operating systems, as well as descriptions about the software and utilities.
Determine the Mac driver version Mac OS X v10.5, v10.6, and v10.7 108 1. From the Apple menu , click the System Preferences menu and then click the Print & Fax icon (Mac OS X v10.5 and 10.6) or the Print and Scan icon (Mac OS X v10.7). 2. Select the product in the left side of the window. 3. Click the Options & Supplies button. 4. Click the General tab to view the driver version number.
Supported operating systems for Macintosh The product supports the following Mac operating systems: ● Mac OS X v10.5, v10.6, and v10.7. The installer CD only supports OS X v10.5 and v10.6. Drivers for OS X v10.7 are available through Apple Software Update. NOTE: For Mac OS X 10.5 and later, PPC and Intel® Core™ Processor Macs are supported.
Printing-system software The product includes the following software for Macintosh computers: ● PDEs for Mac OS X v10.5 and v10.6 only. Mac OS X v10.7 drivers are available for download from Apple Software Update. The installer CD does not support OS X v10.7. PDEs Printer Dialog Extensions (PDEs) are code plug-ins that provide access to product features, such as number of copies, duplexing, and quality settings. The PDEs are HP additions to Apple's print driver. HP Embedded Web Server Mac OS X v10.
Macintosh installation instructions On a Macintosh computer, the installation procedures are basically the same for a network administrator, a network client, and a single user. Install the software on any computer that has save rights to the product. Users must have Administrator rights to install the software.
3. Follow the onscreen instructions to complete the software installation. NOTE: If you are installing the printing-system software on a Macintosh OS X system, be patient. The installer must perform an initial search of the computer for up to 1 minute. During this time the installer might appear to be stalled. 4. When software installation is complete, click Close.
3. In the HP LaserJet installer browser screen, double-click the product icon to open the installer program Introduction dialog.
4. Click the Continue button. The License dialog appears. Figure 4-3 Mac installer License dialog 5. You can save or print the license file by clicking the Save button or the Print button. 6. Read the software license agreement, and then click the Continue file. The license agreement dialog appears.
7. Click the Disagree button to end the installation and close the installer, or click the Agree button to continue the installation.
8. Select the destination for the software and click Continue. The Installation Type dialog appears.
9. Click the Go Back button to go back to the previous screen. To change the installation location, click the Change Install Location button, navigate to the desired location, click the Continue button, and then click the Install button. Go to step 9. Click the Install button to continue the standard installation. Go to step 9. Click the Customize button to open a dialog that lists separate software programs that you can choose to install.
10. An authentication dialog appears. Type the required user name and password, and then click the OK button. Figure 4-8 Mac installer authentication dialog 11. The Installation dialog appears. A progress bar shows the percentage of the installation progress that has been completed. Allow the program to install the software.
12. The Add Printer dialog appears. Click the Add Printer... button to add your printer to the list of available printers.
13. When the installation is complete, the Summary dialog appears, stating that the installation was successful. Figure 4-12 Mac installer Summary dialog Click the Close button to exit the installer. Setup instructions This section contains information about the following topics: ● Setting up a printer with Mac OS X v10.5 and v.10.6 ● Troubleshooting the product setup Setting up a printer with Mac OS X v10.5 and v.10.
3. If you are installing the product using a USB connection, verify that the product appears in the printer list. The Name column in the printer list should display the product name. If this is the case, the USB setup is complete. If the product does not appear, or if the correct information does not appear in the field, see Troubleshooting the product setup on page 123. If you are installing the product using a network connection, continue with the following steps. 4. Max OS X 10.5 and 10.
c. At the product control panel, touch the Network Address button to identify the product IP address or host name. If the Network Address button is not visible, you can find the IP address or host name by printing a configuration page. i. At the product control panel, scroll to and touch the Administration button. ii. Open the following menus: ● Reports ● Configuration/Status Pages ● Configuration Page iii.
8. For Mac OS v10.5 and v10.6: The amount of memory is set automatically. 9. If the product has a hard disk, select the check box next to Printer Disk. Iit should be selected by default. 10. If the product has a duplex unit, select the Duplex Unit check box. 11. Select the appropriate options in the drop down lists for the following items: ● HP LaserJet 500-sheet 5-bin Mailbox ● HP 500-Sheet Stapler/Stacker ● HP 500-Sheet Stacker 12.
Remove software from Mac operating systems You must have administrator rights to remove the software. 1. Open System Preferences. 2. Select Print & Fax. 3. Highlight the product. 4. Click the minus (-) symbol. 5. Delete the print queue, if necessary. 6. Delete the .GZ file from the following hard-drive folder: ● Mac OS X v10.4: Select Macintosh HD, then go to the following directory Library/ Printers/PPDs/Contents/Resources/.
HP Printer Utility for Mac The HP Printer Utility is a software program that gives you access to the product in Mac OS X. The HP Printer Utility does not work when it is installed by using the AppleTalk protocol. Use IP, Bonjour or Rendezvous to enable the HP Printer Utility. The following topics are discussed: ● Access to the HP (Printer) Utility ● Information and support area ● Printer Settings Click the HP Support button to go to the HP Online Support Web site for more help on any of these topics.
2. The main HP Utility screen appears. Click the product in the Devices list. Figure 4-14 HP Utility — main screen The following sections describe the screens and features that are available in the HP Utility.
Information and support area Supplies Status In the Information And Support section of the HP Utility, click Supplies Status to open the Supplies Status screen. Figure 4-15 HP Utility — Supplies Status screen Click Detailed Supplies Information… to open the Supplies Status details screen. Use the scroll button to see information about the print cartridge and kit. On the Supplies Status screen, click Media to see the status of the trays.
Device Information In the Information And Support section of the HP Utility, click Device Information to find the product Service ID (if assigned), the firmware version (FW Version), and the Serial Number. Figure 4-16 HP Utility — Device Information screen File Upload In the Information And Support section of the HP Utility, click File Upload to open the File Upload screen.
Acrobat Reader programs for .PDF files), but can be sent directly to the product by using the File Upload command. ● HP LaserJet printer command language (.PRN) ● Portable document format (.PDF) ● Postscript (.PS) ● Text (.TXT) On the File Upload screen, click Choose… to open a navigation screen. Locate the file you want to upload and click Open. On the File Upload screen, click Display response from the device to see whether the upload was successful.
Update Firmware NOTE: This option is available only after you open the View menu and select the Show Advanced Options menu item. The firmware file can be downloaded from the following Web site: www.hp.com/go/lj600Series_firmware Figure 4-19 HP Utility — Update Firmware screen After you have the firmware file, you are ready to begin the update process. Complete the following steps: 1.
Marketsplash by HP Click the Go button in the Marketsplash by HP section to visit an HP web site and find information on using your product to create marketing information. Figure 4-20 HP Utility — Marketsplash by HP Commands NOTE: This option is available only after you open the View menu and select the Show Advanced Options menu item. The Commands screens gives the user the ability to send special characters or print commands to the product after the print job.
Figure 4-21 HP Utility — Commands screen Printer Settings Supplies Management In the Printer Settings section of the HP Utility, click Supplies Management to open the Supplies Management screen.
The Supplies Management screen allows you to define how the product responds when the supply states are At Very Low for cartridges, image transfer/fuser kits, and the toner collection unit. The Supplies Management screen also allows you to define when that very low message state or alert is given by setting the User Defined Low Threshold (the percentage of estimated supply life left, at which you want the product to alert you that the supply is low).
Resolution In the Printer Settings section, click the Resolution icon to open the Resolution screen. Figure 4-24 HP Utility — Resolution dialog Use the Resolution screen to set the default resolution setting and to set the Resolution Enhancement Technology (REt) level.
Trays Configuration The Trays Configuration screen is shown in the following figure. Figure 4-25 HP Utility — Trays Configuration screen 1. In the Printer Settings section of the HP Utility, select Trays Configuration to change paper size and type for each of the trays installed on your product. 2. To change the paper type, select a tray and then select a different paper type in the Default Media Type drop-down menu. NOTE: Some trays can detect the media size and may be greyed out. 3.
If no paper handling devices are installed, the Output Devices screen will appear as shown in Figure 4-26 HP Utility — Output Devices screen on page 136. Figure 4-26 HP Utility — Output Devices screen Various options can be selected when an output device is installed. For example, the HP 500-Sheet Stapler/Stacker options are listed below: ● Click the Stapling Mode drop-down list to change the stapler/stacker stapling mode.
Use the Enable Duplex Mode command to print internal diagnostic and test pages on both sides of the page. 1. Select the Enable Duplex Mode check box. This box is clear by default. 2. Click Apply Now to enable printing on both sides of the page. Protect Direct Ports In the Printer Settings section of the HP Utility, select Protect Direct Ports to disable printing over USB and parallel ports.
Network Settings In the Printer Settings section of the HP Utility, select Network Settings to open the IP Settings screen. Figure 4-29 IPv4 Settings screen The Network Settings screen provides access to IPv4, IPv6, Bonjour Settings, and Other Settings. Select Configuration, to modify the following settings: ● DHCP ● BootP ● Manual You can also use this screen to modify the following settings: ● Host Name ● IP Address ● Subnet Mask ● Default Gateway To save new settings, click Apply Now.
The HP EWS opens to the Networking screen. To view and change the Bonjour network settings, click Bonjour Settings. Bonjour is enabled by default. To disable Bonjour, click to clear the Enable Bonjour check box and then click Apply Now. Figure 4-30 Bonjour Settings screen Select Bonjour Settings to open the Bonjour Settings screen. Bonjour is enabled by default.
Additional Settings In the Printer Settings section of the HP Utility, select Additional Settings to gain access to the HP EWS. Figure 4-31 Additional Settings screen To open the HP EWS, click Open Embedded Web Server. For information about HP EWS settings, consult the HP EWS online help.
5 Engineering details Introduction This chapter presents engineering detail for the following topics: ENWW ● Paper attributes and commands ● File to E-mail utility Introduction 141
Paper attributes and commands This section includes the following information about paper attributes: ● Paper-source commands ● Paper-type commands examples Paper-source commands The PCL 6 Print driver attribute for paper source is ubyte # MediaSource or ubyte_array "string" MediaSource. See the following table for values of #. For example, "ubyte 4 MediaSource" is the command for Tray 2.
Table 5-2 Paper-type commands (continued) 1 2 Esc& n# Wd Paper type Esc& 11 Wd Letterhead Esc& 13 Wd Transparency1 Esc& 11 Wd Prepunched Esc& 7 Wd Labels Esc& 5 Wd Bond Esc& 9 Wd Recycled Esc& 6 Wd Color Esc& 6 Wd Light Esc& 13 Wd Interpaperte Esc& 6 Wd Heavy Esc& 12 Wd Extra Heavy Esc& 11 Wd Cardstock2 Esc& 6 Wd Rough Esc& 7 Wd Glossy Esc& 12 Wd Tough Paper Esc& 9 Wd Envelope You must spell out the word "Transparency" in the string, alth
The File to E-mail utility consists of two files that are located in the util folder on the product printingsystem software CD: ● Utilities\FileToEmail.exe ● Utilities\FileToEmail.ini To use the File to E-mail utility, copy these files to the desktop, navigate to them in Explorer, and doubleclick FileToEmail.exe to open the utility. The utility generates files, opens an e-mail message, and attaches the files so that you can send them to the system administrator.
Index A accessories, automatic configuration 14 Alternative Letterhead Mode supported products 58 Apple Mac OS see Mac OS 10 autoconfiguration, driver support for 14 autoconfiguration, Enterprise about 14 B bidirectional communication about 14 Enterprise AutoConfiguration 14 Bonjour identifying 18 booklet printing Booklet Layout settings 83 browser requirements HP embedded Web Server 18 C cardstock, paper type commands 143 CD directory structure, Macintosh 111 directory structure, Windows 3 languages 3 Mac
remote update, Macintosh 130 upload, HP Printer Utility 130 fonts install/remove external fonts 98 Macintosh 110 Send True Type as Bitmap, print drivers 57 True Type, print drivers 56 Upload Fonts, HP Printer Utility 129 upload, Configuration Settings menu 129 G general configuration HP Embedded Web Server 20 H heavy paper, paper type commands 143 help Macintosh 110 print drivers 54 host-based driver document preview image 53 Printing preferences tab 53 HP (Printer) Utility, Macintosh access 125 HP Driver C
supplies status 127 trays configuration 135 troubleshooting setup 123 Upload Fonts 129 media supported sizes 64 memory Macintosh requirements 109 messages, constraint print drivers 54 Microsoft Windows installation options 29 mopy 103 multiple-original print.
Personal Job setting, Job Storage tab 89 Print All Text as Black setting, Advanced tab 57 Print on Both Sides settings, Finishing tab 80 Print Optimizations setting, Advanced tab 57 Print Quality settings, Paper/ Quality tab 71 Printer Features setting, Advanced tab 57 printer hard disk, Device Settings tab 102 Printer Status Notification, Device Settings Tab 101 Printing Shortcuts tab contents 59 Proof and Hold setting, Job Storage tab 88 Quick Copy setting, Job Storage tab 89 Resizing Options settings, Ef
Web Jetadmin configuration 17 Web sites download software 2 HP Web Jetadmin, downloading 23 Internet Services options, Services tab 96 other OS support links 27 WIA driver 10 Windows components, software 10 drivers supported 10 installation options 29 Windows operating systems change driver settings 52 Windows OS directory structure, software CD 3 driver versions 12 HP PCL 6 Print Driver features 51 supported 26 ENWW Index 149
150 Index ENWW
© 2011 Hewlett-Packard Development Company, L.P. www.hp.
