- Hewlett-Packard CRT Monitors User Guide
Table Of Contents
- Contents
- Product Features
- Safety and Maintenance Guidelines
- Setting Up the Monitor
- Operating the Monitor
- Troubleshooting
- Technical Specifications
- Agency Regulatory Notices
- Federal Communications Commission Notice
- Declaration of Conformity for Products Marked with FCC Logo, United States Only
- Canadian Notice
- European Union Regulatory Notice
- Disposal of Waste Equipment by Users in Private Household in the European Union
- Japanese Notice
- Korean Notice
- Power Cord Set Requirements
3–2 User Guide
Setting Up the Monitor
Removing the Monitor Base
In the event that you need to disassemble the base from the
monitor, position the monitor bottom side up and follow these
instructions:
1. If you must remove the base attachment, release the catch and
slide the base toward the back of the monitor.
2. Lift the base up and away from the monitor.
Connecting the Cables
Before setting up the monitor, place it in a convenient,
well-ventilated location near the computer.
1. Turn off the power to the computer and other peripheral
devices.
2. Connect the power cord 1 to the back of the monitor, then
connect the power cord to a power outlet.
3. Connect the video cable (blue connector) 2 from the back of
the monitor to the blue 15-pin connector on the back of the
computer. Tighten the cable screws to secure the cable to the
connector.
Ä
CAUTION: To avoid damaging the video cable, ensure that the
cable aligns with the 15-pin connector. Do not force the cable onto
the connector.