- Hewlett-Packard Printer Owner's Manual

Tran-x
high speed parallel/serial converter products allow you to
extend parallel cables to 1000+ feet and allow your network server,
graphics workstation, or PC to send/receive data at speeds up to
46,000 characters per second. You can use the Tran-x Series with
BayTech Model 24SII, LaserShare, or network print servers for the
fastest long distance peripheral sharing solution available anywhere.
Modular cabling provides simplicity in connections between remote
devices.
Tran-x LPT-460
card plugs directly into your PC expansion
slot.
Tran-x PS-02
connects to your PC's parallel port.
Tran-x SP-01
connects to the Centronics connector of a parallel printer.
Tran-x PS-
02
connects to the DB-25 parallel port of the BayTech 700 Series
Print Master or 800 Series Print Master II peripheral sharing units.
"500H" Series, Model 24SII DAC, and Model 60 DAC Data
Acquisition and Control
units connect between one host computer
and multiple peripheral devices. These models are often used in
industrial process-control environments (e.g., for allowing control of
multiple numerical or assembly-line machines), in exchanging data
between point-of-sale devices, or for operating a number of laboratory
instruments or business machines from a central computer. They are
especially effective in adapting small low-cost personal computers to
these applications. Each unit features six modes of operation which
may be easily configured to your application. The
500H
series
models are available with either 5 or 9 ports. The
Model 24SII DAC
unit is expandable from 4 to 24 ports and the
Model 60 DAC
unit is
expandable from 4 to 60 ports in 4-port modular increments.
Telplex Models TX102, TX104 and TX108
are asynchronous
statistical multiplexers which multiplex and demultiplex two, four, or
eight communications channels over a single channel. This single
channel is typically a telephone line or cable. The
TX20
and
TX60
will
multiplex and demultiplex up to twenty and sixty channels
respectively. Programmable features include serial port parameters
(baud rate, word size, etc.), data flow control, user-programmable
strings to be sent to an external modem, and remote diagnostics and
configuration capability. These units must be purchased in pairs.