- Hewlett-Packard Printer Owner's Manual

To run INSTALL, use the following procedure:

1. Insert the software utility diskette into drive A (or drive B) and

from the prompt type

INSTALL

followed by <ENTER>.

2. A menu titled "Drive & Directory Definitions" will appear on your

screen. This menu will display the

Source Drive

Destination

Drive

, and

Destination Directory

. The Source Drive is the

floppy drive where the diskette is inserted. The Destination

Drive is the drive where the expanded files will be copied to

(default is drive C). The Destination Directory is the directory

where the files will be copied to (default is BAYTECH). If the

default parameters do not match your application, you may use

the <TAB> key or a mouse to change fields and type in the

desired parameters. Once you have entered the appropriate

values, select "OK".

3. A menu will appear on your screen titled "Series Definition".

This menu will contain choices for the type of BayTech product

you have purchased. Highlight "700 Series" with the arrow

keys or mouse followed by "OK".

4. A menu titled "Printer Selection Programs" will appear on your

screen. You are given three selections: RAMEXEC, RAMTSR,

and WNDEXEC. Choose RAMEXEC if your PC runs non-

Windows programs that do not operate in graphics mode.

Choose RAMTSR if your PC runs non-Windows programs

which operate in graphics mode. Choose WNDEXEC if your

PC runs under WINDOWS. Select the desired program by

highlighting it with the mouse or <TAB> key and depress the

<SPACE BAR> followed by "OK".

5. When INSTALL is finished, you may review the instructions for

the relevant files by referring to the README file copied to the

Destination Directory. To view the README file on your

screen, enter the command

TYPE README

from your

subdirectory prompt. To print this file, enter the command

COPY README LPT1:

from your subdirectory prompt.