- Hewlett-Packard Printer Owner's Manual

20
Figure 4:
RJ-45 Receptacle
Figure 5:
RJ-45 Plug
Please see Appendix A.5 for modular adapter pinout and cabling
information.

This section discusses the various user-programmable configurations
( Section 6.1 ), printer sharing operation ( Section 6.2 ), the LED
indicators ( Section 6.3 ), and data flow control ( Section 6.4 ).
 
User-programmable configurations include the Port Logical Name, the
Number of Printers/Port Assignment, the Printer Select Code, the
Printer Select Mode, the Serial Port Configuration, the Input Inactivity
Timeout, the Form Feed Mode, and the Header Page Message. The
following subsections describe these parameters in detail.
 #
The Port Logical Name is simply an aid to identifying which device is
connected to which port. It is used in the configuration menus and the
Header Page Message. It has no function other than identification.
Factory default is Device A for Port 1, Device B for Port 2,..., and
Device J for Port 10.