- Hewlett-Packard Printer Owner's Manual

All ports on the Print Master 706A or 708A must be inactive

(i.e., only the green power LED should be illuminated).

With the PARSEND or MS BASIC program loaded on your PC,

send from the keyboard

Control-T

followed by capital

These characters will not print on the printer. The Model 706A

or 708A will respond with the main configuration menu which

should print out on your printer. When configuration mode is

been accessed, all the red LEDs on the front panel will

illuminate.

NOTE:

If only two red LEDs illuminate when

Control-T

and

capital C are sent or if the unit gives no response, this indicates

that an incorrect character sequence has been received. If so,

wait for the unit to time-out (LEDs will go out) and re-send

Control-T

and the ASCII capital C.

From this point on, configuration of the Model 706A or 708A will be

menu driven.

For illustration purposes, we show the configuration menus for the

706A. The only notable exceptions between the 706A and 708A

configuration menus are the actual number of ports shown in the

menus.