- Hewlett-Packard Printer Owner's Manual

51
 
By responding to the Enter Request: message at the end of the main
configuration menu with "1" (Status), you may review the status of the
current configuration of Print Master.
Print Master will respond with a menu similar to:
Current Printer Port Configuration
Port Baud
Rate
Word
Size
Stop
Bits
Parity Logical
Name
Xon/
Xoff
Prnt
Assn
1 9600 8 1 None Device B Off 0
(Press any key to continue)
Current Computer Port Configuration
Port
Baud
Rate
Word
Size
Stop
Bits
Parity Logical
Name
Xon/
Xoff
Prnt
Assn
2 9600 8 1 None Device B Off 0
3 9600 8 1 None Device C Off 0
4 9600 8 1 None Device D Off 0
5 9600 8 1 None Device E Off 0
6 9600 8 1 None Device F Off 0
Input inactivity timeout is..............20 seconds
Number of printers is....................1
Printer Select Code is...................$PRINTER
Printer Select Mode is...................2
Form Feed Mode is........................1
Header Page Message is (OFF):
This print job is for :
(Press any key to continue)
Status........................................1
Set Serial Port Configuration.................2
Set Input Inactivity Timeout..................3
Set Number of Printers........................4
Program Printer Select Code...................5
Set Printer Select Mode.......................6
Set Form Feed Mode............................7
Program Header Page Message...................8
Exit..........................................X
Enter Request:
You may now make whatever changes are necessary by responding
to the above menu. The Exit selection (capital
X
) will return you to the
Operations Mode.