- Hewlett-Packard Printer Owner's Manual

55
 &

By responding to the Enter Request: message at the end of the main
configuration menu with "3" (Set Input Inactivity Timeout), you may set
the input inactivity timeout. Print Master will automatically disconnect
the computer if no characters are received for the specified timeout
period.
Print Master will respond with:
Timeout is................................20 seconds
Enter Timeout (0 to 200), hit return.....:
Type the number of timeout seconds that you wish from 0 to 200,
followed by <ENTER>.
WARNING:
If you type <ENTER> without entering a value in
response to the prompt, the input inactivity timeout will automatically
set to 0 (zero) seconds, disabling the timeout.
CAUTION:
Do not set the input inactivity timeout to zero seconds
when Printer Select Mode 1 has been selected. Mode 1 recognizes
the end of a print job by input inactivity timeout only. It does not
recognize a manual disconnect.
Print Master will save the new input inactivity timeout permanently in
non-volatile memory and return to the main configuration menu ( see
Section 7.2.1 ).