- Hewlett-Packard Printer Owner's Manual

63
 !!
By responding to the Enter Request: message at the end of the main
configuration menu with 1 (Status), you may review the status of the
current configuration of Print Master. Print Master will respond with a
menu similar to:
Port Logical
Name
Port
Type
Port
Assignt
Prnt
Assn
1 Device A Parall Printer 1
2 Device B Parall Computer 0
3 Device C Parall Computer 0
4 Device D Parall Computer 0
5 Device E Serial Computer 0
6 Device F Serial Computer 0
Port Baud
Rate
Word
Size
Stop
Bits
Pariity Xon/
Xoff
5 9600 8 1 None Off
6 9600 8 1 None Off
Press any Key to continue
Input inactivity timeout is..............20 seconds
Number of printers is....................1
Printer Select Code is...................$PRINTER
Printer Select Mode is...................2
Form Feed Mode is........................1
Header Page Message is (OFF):
This print job is for :
Status........................................1
Set Serial Port Configuration.................2
Change Port Logical Name......................3
Set Port Assignment...........................4
Set Input Inactivity Timeout..................5
Program Printer Select Code...................6
Set Printer Select Mode.......................7
Set Form Feed Mode............................8
Program Header Page Message...................9
Exit..........................................X
Enter Request:
You may now make whatever changes are necessary by responding
to the above menu. The Exit selection (capital
X
). will return you to
the Operations Mode.