- Hewlett-Packard Printer Owner's Manual

67
 !!#

By responding to the Enter request: message at the end of the main
configuration menu with "3" (Change Port Logical Name), you may
change the logical name for each connected device to a user-defined
name. Logical names are simply aids to identifying which devices are
connected to which ports. They have no other function.
Print Master will respond with a message similar to:
Enter Port Number (1 to 6, 0=Exit),CR:
Enter the desired port number followed by <ENTER>. For example, if
you type "3" and <ENTER> for Port 3, Print Master will respond with:
Port Logical
Name
Port
Type
Port
Assignt
Printer
Assignt
3 Device C Parall Computer 0
Enter Logical Name:
Enter the new logical name for Port 3. For example, if you entered
"IBM AT" , Print Master will respond with:
Port Logical
Name
Port
Type
Port
Assignt
Printer
Assignt
3 Device C Parall Computer 0
Enter Port Number (1 to 6, 0=Exit), CR:
If you wish to change the logical name on another port, enter that port
number followed by <ENTER> and repeat the above procedure. If no
additional changes are desired, type "0" (zero) and <ENTER>. Print
Master will save the new logical names permanently in non-volatile
memory and return to the main configuration menu (see Section
7.3.1 ).