- Hewlett-Packard Printer Owner's Manual

68
 !!

By responding to the Enter Request: message at the end of the main
configuration menu with "4" (Set Port Assignment), you may assign
any port as a computer port or a printer port.
NOTE:
Port 10 on Models 710E and 710F may not be assigned as a
printer port.
Print Master will respond with a message similar to:
Enter Port Number (1 to 6, 0=Exit),CR:
Enter the number of the port that you wish to designate a computer or
printer port. For example, if you type "3" and <ENTER> for Port 3,
Print Master will respond with:
Port Logical
Name
Port
Type
Port
Assignt
Printer
Assignt
3 Device C Parall Computer 0
Change to Printer or Computer port? (P/C):
Enter capital
P
if you wish this port to be a printer port. Enter capital
C
if you wish this port to be a computer port. For example, if you
enter "P", Print Master will respond with:
Port Logical
Name
Port
Type
Port
Assignt
Printer
Assignt
3 IBM AT Parall Printer 0
Number of Printers is.....................2
Enter Port Number (1 to 6, 0=Exit), CR: