- Hewlett-Packard Printer Owner's Manual

69
NOTE
: At least one port must always be designated as a printer port.
If the port number you enter is the only assigned printer port, Print
Master will prevent you from reassigning that port and will prompt you
with a message similar to:
Cannot Reassign the Only Printer Port
Enter Port Number (1 to 6, 0=Exit),CR:
If you wish to change the assignment of another port, type that port
number and <ENTER>, and repeat the above procedure.
When no other port assignment changes are needed, type 0 (zero)
and <ENTER>. Print Master will save the new port assignments
permanently in non-volatile memory and return to the main
configuration menu (see Section 7.3.1 ).
NOTE:
When the port assignment is changed for any port, the printer
assignment on all computer ports automatically resets to 0 (zero),
putting Print Master into contention mode.