- Hewlett-Packard Printer Owner's Manual

72
" !!

By responding to the Enter Request: message at the end of the main
configuration menu with "7" (Set Printer Select Mode), you may
change the method of selecting printers.
Print Master will respond with:
Select Printer -
At the Beginning of Printing Only...1
Anytime While Printing..............2
Printer Select Mode is..............2
Enter Printer Select Mode...........:
Enter the Printer Select Mode you want. Print Master will save the
new Printer Select Mode permanently in non-volatile memory and
return to the main configuration menu (see Section 7.3.1 ).
( !!

By responding to the Enter Request: message at the end of the main
configuration menu with "8" (Set Form Feed Mode), you may select
one of four form feed modes.
Print Master will respond with:
No Form Feed...............................1
Form Feed at the Beginning of Printing.....2
Form Feed at the End of Printing...........3
Form Feed at the Beginning and End.........4
Form Feed Mode is..........................1
Enter Form Feed Mode.......................:
You should then enter the Form Feed Mode you want. Print Master
will save the new form feed mode permanently in non-volatile memory
and return to the main configuration menu (see Section 7.3.1 ).