- Hewlett-Packard Printer Owner's Manual

89
(
By responding to the Enter request: message at the end of the main
configuration menu with "1" (Status), you may review the current
configuration status of Print Master. Print Master will respond with
menus similar to the following:
Port Logical
Name
Port
Type
Port
Assignt
Unit
Assn
Printer
Assn
1 Device A Parall Printer 1 0
2 Device B Serial Computer 1 0
3 Device C Serial Computer 1 3
4 Device D Parall Computer 1 0
5 Device E Serial Computer 1 0
6 Device F Serial Computer 1 0
7 Device G Serial Computer 1 0
8 Device H Serial Computer 1 0
9 Device I Serial Cascading 1 0
10 Device J Serial Cascading 1 0
Strike any Key to Continue, or X to Exit
Port Baud
Rate
Word
Size
Stop
Bits
Pariity Xon/
Xoff
2 9600 8 1 None Off
3 9600 8 1 None Off
4 9600 8 1 None Off
5 9600 8 1 None Off
6 9600 8 1 None Off
7 9600 8 1 None Off
8 9600 8 1 None Off
9 9600 8 1 None Off
10 9600 8 1 None Off
Strike any Key to Continue, or X to Exit
Time Out is..............................20 Seconds
Number of Printers is....................1
Printer Select Code is...................$PRINTER
Printer Select Mode is...................2
Form Feed Mode is........................1
Header Page Message is ( OFF):
This Print Job is for :
Unit Identification Number is ...........1
Strike any Key to Continue, or X to Exit