HP Digital Sender 8100C User Guide
2 Copyright Information Warranty Safety Information © Copyright Hewlett-Packard Company 2000 The information contained in this document is subject to change without notice. WARNING! Electrical Shock Hazard All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under copyright laws. Publication number C7707-90005 First Edition, April 1, 2000 Trademark Credits CompuServe is a U.S. trademark of CompuServe, Inc. Microsoft is a U.S.
3 Contents 1 Getting started Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Identifying digital sender parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Identifying control panel features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Managing your user profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Adding a registered user profile.
4 4 Troubleshooting Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Clearing paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Troubleshooting the digital sender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 General digital sender troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Control panel messages . . . . . . . . . . . . .
Introduction 1 Getting started Introduction Thank you for purchasing the HP Digital Sender 8100C. This color, network digital sender helps you quickly and conveniently distribute paper documents in electronic format. The digital sender works with other devices and programs so you can: ● ● ● E-mail — Send a document directly to e-mail destinations. Fax — If your company subscribes to a supported Internet fax service, fax a document to one or more destinations.
6 Identifying digital sender parts Before using the digital sender, use the diagram below to familiarize yourself with the parts of the digital sender.
Identifying digital sender parts Front view with ADF unit raised ADF unit (raises to reveal glass) Glass 7
8 Identifying control panel features Use this diagram to familiarize yourself with control panel features. 1 12 2 13 3 4 14 15 5 6 7 8 11 9 10 1 Control Panel Display — Displays information and messages. 2 Go key — Sends a document. In the manuals, this key is shown as this symbol: . 3 Cancel key — Stops sending process or returns to the main display screen. In the manuals, this key is shown as this symbol: . 4 Single-sided/double-sided key — Selects single-sided or doublesided original.
Identifying digital sender parts 10 Backspace key — Deletes the last typed character or removes destinations from the selection list. This key is located just above the ENTER key. When referring to this key in this manual, it will be shown like this: BACKSPACE. 11 Numeric keys — Enter numbers or special characters for your language (except English). 12 Special characters sticker — Contains instructions for accessing the special characters available for your language (except English).
10 Managing your user profile There are two different types of users for the digital sender: ● Registered users. Registered user must establish a user profile, and they have full access to all features. ● Guest users. Guest users do not have to establish a user profile, but they also do not have full access to all features. Registered users As a registered user, you have the following privileges: ● ● ● ● ● You can use the digital sender even if the administrator disables guest usage.
Managing your user profile Adding a registered user profile The administrator decides whether or not you can add a registered user profile, or if only he or she can. If you try to add yourself and are asked for the administrator password, contact the administrator. If the administrator allows you to set up your own profile, you can do so from the Users menu, or from the login dialog box the first time you send an e-mail or try to add to an e-mail or fax book.
12 To add a registered user profile when you send an e-mail or access address books Note 1 Press EMAIL (F1) or LISTS (F4). 2 If you selected LISTS in the previous step, use the and keys to select Personal E-Mail addresses or Personal E-Mail lists and press ENTER. 3 In the Name or From field, type your name and press ENTER. 4 At the Would you like to register as a user? prompt, press YES (F1). If the prompt does not appear, see the administrator to register.
Managing your user profile Changing options for your profile If you want to change your password, user name, or other registered user information, you can do so if the administrator allows it. If not, you receive a message to contact the administrator. To change options for your profile Do one of the following: ● Access the Users menu and change your profile as you added it. Click here to see instructions.
14 Finding help This user guide provides instructions to help you use the digital sender, and it will also help you troubleshoot if you experience a problem. Additionally, the digital sender itself houses Help to assist you. The Help for the digital sender contains context-sensitive Help. When you press , help appears for the active field on the control panel display.
Introduction 2 Sending documents Introduction The HP Digital Sender 8100C lets you send a variety of single- and double-sided documents to e-mail addresses and distribution lists. You can also send to any fax number if your company subscribes to an Internet fax service. Sending a document is a simple, two-step process: 1. Load the document. 2. Choose a destination.
16 Guidelines for documents The HP Digital Sender 8100C is both a sheetfed and a flatbed digital sender. You can insert up to 25 pages (single- or double-sided) into the automatic document feeder (ADF) and quickly send them. On the glass, you can place documents that you cannot put in the ADF, such as photographs, pages from books, newspaper clippings, and fragile or lightweight documents. Guidelines for using the ADF Using the ADF is a fast, convenient way to send documents.
Guidelines for documents Guidelines for using the glass The glass is the best way to send unusual documents. Examples of unusual documents include: ● Documents on media lighter than 60 g/m2 (16 lb) or heavier than 105 g/m2 (28 lb). ● Irregular sizes or shapes, such as newspaper clippings, receipts, or business cards. ● ● Transparencies. Gum-backed paper. ● Multipart forms with carbon pages. ● Old or worn photographs or documents.
18 Step 1 Load a document 2 3 You can load a stack of pages in the ADF or load one page at a time on the glass. See "To load a document in the ADF" or "To load a document on the glass.” CAUTION Before using the ADF, remove from the document anything such as self-adhesive notes, paper clips, or staples, that could get caught in the digital sender and damage it. To load a document in the ADF 1 Raise the ADF unit and ensure nothing is on the glass. Then, close ADF unit.
Step 1 Load a document 1 2 3 4 To load a document on the glass 1 Raise the ADF unit to reveal the glass. 2 Place the page face down on the glass, top edge toward the back. 3 Align the document in the upperright corner of the glass. 4 Lower the ADF unit.
20 Step 2 Choose a destination You can send a document to: ● ● ● e-mail addresses or distribution lists fax numbers or distribution lists (if your company subscribes to a supported Internet fax service) HP JetSend-enabled printers E-mailing documents When you e-mail from the digital sender, it creates a message and attaches your document as a file. You can send to e-mail addresses by typing an address or choosing an address or distribution list stored in an address book.
Step 2 Choose a destination To send to e-mail destinations Note At any time before pressing to send the document, you can press or BACK (F4) to return to the main screen without saving any settings. 1 Press E-MAIL (F1). If guest usage is disabled, then only registered users can use the digital sender. This login screen opens: Welcome -- please sign in.
22 4 Do one of the following to choose an e-mail destination: ● Type an e-mail address. ● Begin typing the name of an address or distribution list stored in an e-mail book. As you type, the digital sender completes the name. ● Use the ● Begin typing the name of an e-mail address on an LDAP server and press SEARCH (F2) [or press SHIFT+SEARCH (F2) to access advanced search options]. Use the and keys s to select an address and press OK (F1).
Step 2 Choose a destination 8 Press ● ● ● Note to begin sending the document. If you sent a single-sided document, the process is finished. If you sent a double-sided document using the ADF, wait for the first side to finish. Then, reload the document with the second side facing up, last page on top, and press again. If you used the glass, remove the page when it is finished. Then, place the next page face down on the glass and press . After the last page, press SEND (F4).
24 Faxing documents If your company has Internet fax service, you can send documents from the digital sender to fax destinations. If the service is not configured, you receive a message. See the administrator. When sending a fax, you can type fax numbers or you can choose fax destinations from the public Fax numbers or lists books. (For more information about books, see chapter 3 “Managing address books” on page 31.
Step 2 Choose a destination 4 Note Repeat steps 2 and 3 to add more fax destinations. To view the list, press TAB and use the and keys to scroll the destinations. To remove a destination, select it and press BACKSPACE. 5 The Paper Size and Format settings appear in the upper right corner of the display. To change these settings, see “Changing settings (optional)” on page 28. 6 Press to begin sending the document. ● If you sent a single-sided document using the ADF, the process is finished.
26 Printing to HP JetSend-enabled printers The digital sender is an HP JetSend-enabled device. You can use its HP JetSend capabilities to send to printers on your company’s network that are HP JetSend enabled and have valid TCP/IP addresses. If you receive a message requesting a TCP/IP address when you press PRINT (F3), see the administrator. You can send one copy at a time to one printer at a time. Whether the copies print single-sided or double-sided is determined by the printer’s settings.
Step 2 Choose a destination 4 Press to begin sending the document. ● If you sent a single-sided document using the ADF, the process is finished. ● If you sent a double-sided document using the ADF, wait for the first side to finish. Then, reload the document with the second side facing up, last page on top, and press again. ● If you used the glass, remove the page when it is finished. Then, place the next page face down on the glass and press . After the last page, press SEND (F4).
28 Changing settings (optional) The Paper Size, Quality, and Format settings appear in the upper right corner of the control panel display. Use this procedure to change the Paper Size and Quality options. You can also use this procedure to change the file format setting, if you see the Format option on the Settings menu. To change the Paper Size, Quality, and Format settings 1 With a document loaded and a destination selected, press SETTINGS (F1). The Settings menu appears.
Changing settings (optional) 5 If you do not need to change the paper size, go to step 7. Or, press until Size is selected and press ENTER. 6 Using the and keys, choose A4, Letter, or Legal and press ENTER. (If the document you are sending is an irregular size, choose the option that most closely matches.) 7 If you are e-mailing a document and see the Format option in the Settings menu, you can change the file format. Press until Format is selected and press ENTER.
30
Introduction 3 Managing address books Introduction If you are a registered user, you can store frequently used e-mail addresses and fax numbers in books. You can also build distribution lists of e-mail addresses or fax numbers so you can easily send documents to groups of people. To become a registered user, see “Managing your user profile” on page 10.
32 Using address books The digital sender stores addresses and fax numbers in the following address books under the Lists menu: ● Your Personal E-Mail addresses book Stores personal e-mail addresses that you can use when sending e-mail. No one except you and the administrator can see, change, or use entries in this personal address book. ● Your Personal E-Mail lists book Stores personal e-mail distribution lists that you can use when sending e-mail.
Using address books Viewing address books You can view entries in your two Personal E-Mail books as well as the two public Fax books. To view books Note 1 Press LISTS (F4). 2 Use the and keys to select a book and press ENTER. The login dialog box opens. 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER. If you are prompted to become a registered user, press YES (F1) or see the administrator.
34 Managing your Personal E-Mail addresses book If you are a registered user, you can store e-mail addresses in your Personal E-Mail addresses book and use the entries when you e-mail a document. Use the procedures in this section to add, modify, and delete addresses from your Personal E-Mail addresses book. Note You can view and use information in the public E-mail addresses book, but you cannot change it. Contact the administrator to make changes to the public E-Mail addresses book.
Managing your Personal E-Mail addresses book To add addresses 1 Press LISTS (F4). 2 Press and press ENTER to select Personal E-Mail addresses. The login dialog box opens. 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER. This dialog box opens: Name: SEARCH 4 BACK Add an address by doing one of the following: ● Type a name for this entry in the Name field and press ADD (F1).
36 Modifying or deleting e-mail addresses Once you have added addresses to your Personal E-Mail addresses book, you can change the name and e-mail information. Changing this information also changes it in any of your Personal distribution lists where it appears. If an e-mail address in your Personal E-Mail addresses book is no longer useful, you can delete it. Deleting an address from this address book also deletes it from any of your Personal distribution lists where it appears.
Managing your Personal E-Mail lists Managing your Personal E-Mail lists Your Personal E-Mail lists book contains distribution lists you create using e-mail addresses. Distribution lists are useful if you regularly send e-mail to the same group of people. E-mail distribution lists can only consist of e-mail addresses. You cannot create distribution lists containing both e-mail addresses and fax destinations. Note You can view and use information in the Public E-Mail lists book, but you cannot change it.
38 To create new lists 1 Press LISTS (F4). 2 Press ENTER to select Personal E-Mail lists. The login dialog box opens. 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER. This dialog box opens: List name: MODIFY DELETE BACK 4 In the List name field, type a name for this list and press ENTER. 5 A new dialog box opens.
Managing your Personal E-Mail lists Adding addresses to existing lists Use this procedure to add addresses to e-mail distribution lists you have already created. To add addresses to existing lists 1 Press LISTS (F4). 2 Press ENTER to select Personal E-Mail lists. The login dialog box opens. 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER.
40 Changing or deleting addresses in lists Use this procedure to change or delete e-mail addresses from a distribution list in your Personal E-Mail lists book. While in a selected distribution list, you can change the information for an e-mail address contained in the list, as long as the address is from your Personal E-Mail address book.
Managing your Personal E-Mail lists To change or delete addresses in lists 1 Press LISTS (F4). 2 Press ENTER to select Personal E-Mail lists. The login dialog box opens. 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER. This dialog box opens: List name: MODIFY 4 5 6 Bergamo Firenze Milano DELETE BACK Select a list using one of these ways: ● Begin typing the name of a list. The book displays the closest matching one.
42 Deleting e-mail lists If they are no longer useful, you can delete distribution lists from your Personal E-Mail lists book. To delete e-mail lists 1 Press LISTS (F4). 2 Press ENTER to select Personal E-Mail lists. The login dialog box opens. 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER.
Managing the Fax numbers book Managing the Fax numbers book Registered users and the administrator can add, change, or delete fax numbers stored in the Fax numbers book. Because these are public fax numbers, any other registered user can also see, change, or delete any fax number. Note The administrator can change entries in the public Fax numbers or lists book from the Lists option in the Setup menu. Adding fax numbers Only registered users can add fax numbers to the public Fax numbers book.
44 To add fax numbers 1 Press LISTS (F4). 2 Use the 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER. 4 When the dialog box shown below opens, type a name for this entry in the Name field and press ENTER. and keys to select Fax numbers and press ENTER. Name: BACK Note 5 A new dialog box opens. Press TAB to enter the Fax # field. 6 Press SHIFT+BACKSPACE to clear the field contents.
Managing the Fax numbers book Modifying or deleting fax numbers Use this procedure to modify or delete fax numbers in the public Fax numbers book. CAUTION This is a public book that stores all fax numbers for all users. Do not modify or delete fax numbers other users may need, or make sure that altering the fax numbers does not negatively affect others using them. To modify or delete fax numbers 1 Press LISTS (F4).
46 Managing the Fax lists book Registered users can add, change, or delete fax distribution lists stored in the Fax lists book. Because these are public lists, any other user can also see, change, or delete any fax distribution list. Creating new fax lists You can create a fax distribution list from fax numbers stored in the Fax numbers book, or fax numbers you type as you build the list. To create new fax lists 1 Press LISTS (F4).
Managing the Fax lists book Adding fax numbers to existing lists Use this procedure to add fax numbers to a fax distribution list that has already been created. CAUTION This is a public book that stores all fax lists for all users. Do not alter others’ lists, or make sure that altering lists does not negatively affect others using them. To add fax numbers to existing lists 1 Press LISTS (F4). 2 Use the 3 Type your user name (or use the and keys to scroll to it) and press ENTER.
48 7 Repeat step 6 to add more fax numbers to this list. 8 When finished, press BACK (F4). 9 Repeat steps 4 through 8 to add more fax numbers to other fax lists. 10 When finished, press BACK (F4). Modifying or deleting fax numbers in lists Use this procedure to modify fax numbers in or delete fax numbers from a distribution list. If you modify the fax number, it is also automatically updated in the public Fax numbers book and any distribution list in which it appears.
Managing the Fax lists book To modify or delete fax numbers in lists 1 Press LISTS (F4). 2 Use the 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER. This dialog box opens: and keys to select Fax lists and press ENTER. List name: E. European offices E. North Am. offices W. European offices MODIFY DELETE BACK 4 5 6 Select a list using one of these ways: ● Begin typing the name of a list.
50 Deleting fax lists If a fax distribution list is no longer useful, you can delete it from the public Fax lists book. CAUTION This is a public book that stores all fax distribution lists for all users. Do not delete lists that other users may need. To delete fax lists 1 Press LISTS (F4). 2 Use the and keys to select Fax lists and press ENTER. The login dialog box opens. 3 Type your user name (or use the and keys to scroll to it) and press ENTER. Then, type your password (if set) and press ENTER.
Introduction 4 Troubleshooting Introduction This chapter is your guide for resolving problems that might occur while you are using the HP Digital Sender 8100C. The chapter is divided into the following sections: ● Clearing paper jams. See page 52. ● Troubleshooting the digital sender. See page 56. Typically, messages appear on the control panel when there are problems. These messages usually require some action before sending can continue.
52 Clearing paper jams 1 2 When you have a paper jam, the control panel displays this message: Paper Jam Detected! Clear jam and press OK. Or Press HELP for instructions. Use the appropriate procedure below to clear the jam. To clear jams at the start of a page CAUTION Only remove jams after raising the control panel. Removing jammed paper with the control panel in its normal position can damage it. 3 4 1 Move the document lever to the number 1 position.
Clearing paper jams 5 6 7 5 Press down firmly on both sides of the control panel until both sides click. 6 Smooth the jammed page, place it on top of the document stack, and reload the document. 7 Move the document lever to the number 3 position. 8 The destinations to which you were sending are still set in the digital sender. Press to begin sending the document again.
54 1 2 3 4 To clear jams at the end of a page 1 Move the document lever to the number 1 position. 2 While holding down on the document input tray, raise the control panel. 3 While holding the document output tray down, raise the document input tray (and the control panel). 4 Remove the jammed paper.
Clearing paper jams 5 5 Close the ADF unit and control panel. Press each down firmly until it clicks. 6 After removing the stack from the ADF, smooth the jammed page, add it to the top of the stack, and reinsert the stack. 7 Move the document lever to the number 3 position. 8 The destinations to which you were sending are still set in the digital sender. Press to begin sending the document again.
56 Troubleshooting the digital sender Troubleshooting for the digital sender is divided into two sections, General digital sender troubleshooting and Control panel messages. General digital sender troubleshooting includes problems that might occur that do not generate error messages. Note As a general rule for all problems, check the control panel for relevant messages. See “Control panel messages” on page 59.
Troubleshooting the digital sender General digital sender troubleshooting (continued) Problem Actions When using the ADF, the digital sender does not feed the document at all. ● Ensure that the document lever is being used correctly. Otherwise, the When using the ADF, the digital sender is feeding multiple sheets, skewing pages, or jamming frequently. ● If the pages look like they skewing as they feed into the ADF, this is normal. digital sender scans the glass instead of the item in the ADF.
58 General digital sender troubleshooting (continued) Problem Actions A fax transmission you sent did not arrive at the destination fax machine. ● The receiving fax machine might be turned off or experiencing an error condition such as out of paper or toner. Check with the recipient. ● Make sure you entered the entire fax number, including the long-distance access number, such as a 1, and the area code or other numbers needed to dial long distance.
Troubleshooting the digital sender Control panel messages This following table lists the messages the control panel might display while you are using the digital sender, the cause of the message, and recommended actions. Note The messages are listed in alphabetical order. Messages that report normal status are not included. Control panel messages Message Description Action AB Error codes Digital sender halted. An internal problem in accessing address books has occurred.
60 Control panel messages (continued) Message Description Action Invalid credentials. Check The name and password that Contact the administrator. account name and password. have been configured for authenticating LDAP searches are invalid. Invalid PIN. Job canceled. You incorrectly entered the Resend the document, entering the correct PIN (personal identification PIN number. number) for the HP JetSendenabled printer to which you were sending. JetDirect not responding.
Troubleshooting the digital sender Control panel messages (continued) Message Description Action Object not found. Check your Either the search root or the Contact the administrator. configuration. name/password combination for authenticating searches in the LDAP server is incorrect. Paper feeder not connected. The ADF unit is not securely Make sure the cable that attaches the ADF Check the paper feeder connected to the digital unit to the digital sender is connected cable. sender. securely.
62 Control panel messages (continued) Message Description Action The DNS configuration is inconsistent. Please check. There is a problem with the ● Turn the digital sender off and then back DNS (Domain Name System) on. ● If the problem persists, contact the configuration. administrator. The e-mail configuration is inconsistent. Please check. There is a problem with the e-mail configuration. ● Turn the digital sender off and then back on. ● If the problem persists, contact the administrator.
Troubleshooting the digital sender Control panel messages (continued) Message Description Action This will clear the configuration and all the destinations. Do you really want to proceed? You are being asked to Contact the administrator. confirm that you want to reset the digital sender to the factory defaults. This will clear your changes. You are being asked to Do you really want to confirm that you want to proceed? discard all changes made in the configuration menu. Contact the administrator.
64
Hewlett-Packard limited warranty statement A Warranty and support information Hewlett-Packard limited warranty statement HP PRODUCT HP Digital Sender 8100C DURATION OF HARDWARE WARRANTY One year 1 HP warrants HP hardware, accessories, and supplies against defects in materials and workmanship for the period specified above. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective.
66 6 Note Warranty does not apply to defects resulting from improper or inadequate maintenance or calibration, software, interfacing, parts or supplies not supplied by HP, unauthorized modification or misuse, operation outside of the published environmental specifications for the product, or improper site preparation or maintenance.
Hewlett-Packard Year 2000 warranty Hewlett-Packard Year 2000 warranty Subject to all of the terms and limitations of the HP Limited Warranty Statement provided with this HP Product, HP warrants that this HP product will be able to accurately process date data (including, but not limited to, calculating, comparing, and sequencing) from, into, and between the 20th and 21st centuries, and the year 1999 and 2000, including leap year calculations, when used in accordance with the Product documentation provided
68 HP customer support options worldwide You can call HP for support using the table below. For all other support information, such as obtaining printer drivers or help using an online server, see “HP support” on page 70. If you need a replacement part or information not listed in one of these two tables, see the administrator guide. Customer Support and Product Repair Assistance for the U.S. and Canada (See the administrator guide for additional product repair information.
HP customer support options worldwide All other countries worldwide: Use the telephone number below for your country to obtain support during the warranty period. If you require support after your warranty has expired, additional product repair services, or if your country is not listed below, see the administrator guide.
70 HP support Online services: for 24-hour access to information over your Internet connection, we suggest these services: World Wide Web URL - Firmware upgrades, printer drivers, updated HP printer software, plus product and support information may be obtained from the following URLs: for HP Digital Sender 8100C www.digitalsender.hp.com in the U.S. www.hp.com in Europe www2.hp.com Printer drivers may be obtained from the following sites: in Japan www.jpn.hp.com/drivers in Korea www.hp.co.
71 Index Symbols .pdf files e-mailing 20 opening 23 reading attachments 23 .tif files reading attachments 23 A A4 paper size, selecting 28 accessories and supplies warranty 65 Acrobat Reader attaching 23 downloading and installing 23 location 23 adding address book passwords 11 e-mail addresses 34 registered users 11 address books. See books ADF (automatic document feeder) clearing paper jams 54 guidelines 16 illustration 6 loading 18 using for double-sided documents 17 Adobe Acrobat Reader.
72 control panel books not accessible 57 display 8 features 8 illustration 8 messages 59 not working 56 customer support options worldwide 68 D dealers, authorized 70 defects in product 65 deleting e-mail addresses 36 e-mail addresses in lists 41 e-mail lists 42 fax lists 50 fax numbers 45 fax numbers in lists 49 Delivery Service Notification (DSN) 11, 12 description digital sender 5 destinations sending to e-mail 21 sending to fax number 24 display control panel 8 distribution lists adding e-mail addresses
73 G glass cleaning 56 guidelines 16 loading 19 sending double-sided documents 17 glass, scanner 6 Go key 8 guest users 10 H hardware repair assistance 68 troubleshooting 56 warranty 65 Help key 8 online for digital sender 14 HP authorized dealers 70 HP JetSend. See JetSend HP Support Assistant compact disc 70 I I-fax.
74 overview digital sender 5 P pages bottom cut off 58 missing in second pass 60 too many in second pass 63 panel, control. See control panel paper jams clearing at end of page 54 clearing at start of page 52 troubleshooting 57 paper size choices 28 selecting 28 passwords for personal books 11 not accepted 56 PC. See computer PDF files. See .
75 simplex.
76