- Hewlett-Packard Server Operator's Guide

Chapter 5 115
Configuration utilities
Configuration utilities
report_cfg processor report
To obtain a report on the processor in a complex, use the -p option. The
following is a sample processor report by report_cfg:
report_cfg -p
Complex |Node#| MIB COP | SCUB COP
====================+=====+=======================+=======================
hw2a 0 A5074-60002 00 a 3845 A5074-60003 00 b 3830
hw2a 2 A5074-60002 00 a 3840 A5074-60003 00 b 00XA
Complex |Node#|Processor | COP | CPU rev
====================+=====+==========+=======================+========
hw2a 0 PB0L_A A5077-60005 00 a 00XA 2.0
hw2a 0 PB1R_A A5492-60001 00 b 00XC 2.3
hw2a 0 PB1L_A A5491-60001 00 a 00XA 2.0
hw2a 0 PB4L_A A5492-60001 00 b 00XB 3.0
hw2a 0 PB5L_A A5492-60001 00 a 00XB 2.0
hw2a 0 PB0L_B A5077-60005 00 a 00XA 2.0
hw2a 0 PB1L_B A5491-60001 00 a 00XA 2.0
hw2a 0 PB4L_B A5492-60001 00 b 00XB 2.0
hw2a 0 PB5L_B A5492-60001 00 a 00XB 2.0
Complex |Node#|Processor | COP | CPU rev
====================+=====+==========+=======================+========
hw2a 2 PB2L_A A5491-60001 00 a 00XA 2.0
hw2a 2 PB2R_A A5492-60001 00 a 00XA 2.0
hw2a 2 PB3R_A A5491-60001 00 a 00XA 2.0
hw2a 2 PB4L_A A5492-60001 00 b 00XC 2.0
hw2a 2 PB5L_A A5491-60001 00 a 00XA 2.0
hw2a 2 PB4L_B A5492-60001 00 b 00XC 2.3
xsecure
xsecure is an application that helps make a V2500/V2600 class SSP
secure from external sources. This tool disables modem and LAN activity
to provide an extra layer of security for the V2500/V2600 system.
xsecure may be run as a command line tool or an windows-based
application.
In secure mode, all network LANs other than the tsdart bus are disabled
and the optional modem on the second serial port will be disabled. When
in normal mode all networks and modems are re-enabled.