HP Access Control (HP AC) Secure Pull Print Web Interface User Guide
Printed in the US © Copyright 2013 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation. Confidential computer software. Valid license from HEWLETT-PACKARD required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
Table of contents 1 Introduction .................................................................................................................................................. 1 2 Logging in ..................................................................................................................................................... 2 2.1 Log in with Windows Authentication ............................................................................................................... 2 2.
List of tables Table 1-1 Instruction sheets ................................................................................................................................................
List of figures Figure 2-1 Login screen ........................................................................................................................................................ 2 Figure 3-1 Home screen ........................................................................................................................................................ 3 Figure 3-2 Documents screen ...............................................................................................................
vi
1 Introduction Thank you for choosing HP Access Control (HP AC) Secure Pull Print Web Interface. This user guide includes a set of 3-4 step instructions for performing typical tasks on HP Access Control (HP AC) Secure Pull Print Web Interface. The following table lists the available one-page instruction sheets for HP Access Control (HP AC) Secure Pull Print Web Interface.
2 Logging in This section explains the HP Access Control (HP AC) Secure Pull Print Web Interface login process. 2.1 Log in with Windows Authentication ● Open a web browser and enter the following in the address field: http://servername/hpac Where servername is the name or IP address of the server containing the installation of HP Access Control (HP AC) Secure Pull Print Web Interface Configurator.
3 Managing documents This section explains the Managing documents feature . 3.1 Login ● Open a web browser and enter the following in the address field: http://servername/hpac Where servername is the name or IP address of the server containing the installation of HP Access Control Web Interface Configurator. ● Click the Documents icon. Figure 3-1 Home screen 3.2 Manage documents Figure 3-2 Documents screen ● Under Documents, select all or individual documents.
4 Change PIN 4.1 How to change a PIN This section explains how to change a PIN (personal identification number). 4.2 Login 1. Open a web browser and enter the following in the address field: http://servername/hpac Where servername is the name or IP address of the server containing the installation of HP Access Control Web Interface Configurator. 2. If prompted, enter credentials. 3. Click Login. 4. Click the Setup icon. Figure 4-1 Home screen 4.3 Change settings 1. Click the Change PIN tab.
4. Verify the new PIN in the Confirm new PIN field. 5. Click Change PIN. 4.4 Logout 1. Click Logout. 2. Close the browser window. Section 4.
5 Generate new PUK code This section describes how to generate a new PUK code. 5.1 Login 1. Open a web browser and enter the following in the address field: http://servername/hpac Where servername is the name or IP address of the server containing the installation of HP Access Control Web Interface Configurator. 2. If prompted, enter credentials. 3. Click Login. 4. Click the Setup icon. Figure 5-1 Home screen 5.2 Generate new PUK code 1. Click the Codes tab. Figure 5-2 Codes tab 6 2.
5.3 Logout ● Click Logout. ● Close the browser window. Section 5.
6 Default language This section explains how to change the default language of your HP Access Control (HP AC) Secure Pull Print Web Interface application. 6.1 Login 1. Open a web browser and enter the following in the address field: http://servername/hpac Where servername is the name or IP address of the server containing the installation of HP Access Control (HP AC) Web Interface Configurator. 2. If prompted, enter credentials. 3. Click Login. 4. Click the Setup icon.
