User's Manual

Settings
3Com®AirProtectPlannerUserGuide
101
Figure 134. Settings – AP Defaults
DefinesettingsforthefollowingAPparameters.
• APPrefix:SpecifythetexttoprefixtoanAPwhenAPsarenumbered.
• Model:SelectanAPmodelfromthedrop‐downlistofcommerciallyavailableAPmodels.Plannerenables,disables,
orchangestheotherpropertiesinthisdialogboxbased
ontheselectedAPmodel.
• SelectRadio:Selecttheradiofromthedrop‐downlist.
• RadioProperties
¾ SSID:EntertheSSIDoftheAP’sradio.
 Click<Add>toaddanSSIDintheListofSSIDs.
¾ ListofSSIDs:DisplaysthelistofSSIDsoftheAP’sradio.
 Click<Delete>todeleteanSSIDselectedfromtheListofSSIDs.
¾ Antenna:Selectanantennafromthedrop‐downlist.
 Click<More>toviewadditionaldetailsoftheantenna.TheSelectAntennadialogboxappearswhichhelps
youaddor
selecttheantennainabettermanner,fromthelistofavailableantennae.
¾ Orientation:Selectadirectioninwhichtheantennawouldradiateitspower.
Thepreviewreflectstheantennaradiationbasedontheantennaselected.
¾ ActiveProtocol:Selectanactiveprotocolfromthedrop‐downlist.Each
radiocanoperateonanyoneofthe
protocols.
¾ Channel:Selectanoperatingchannelfortheselectedprotocol.Selecttheprimaryandsecondarychannelsfrom
thedrop‐downlist.Thedifferencebetweentheprimaryandsecondarychannelvaluesisfourunits.
¾ WaterfallCurve:Selectawaterfallcurvefromthe
drop‐downlistofavailablewaterfallcurvesfortheselected
protocol.