User's Manual

AppendixC:FileLevelandApplicationLevelParameters
3Com®AirProtectPlannerUserGuide
110
AppendixC:FileLevelandApplicationLevelParameters
ThefollowingsectionpresentsanoverviewoftheFilelevelandtheApplicationlevelparameters.
Table 1 File Level Parameters
File Level Parameters Data Type Default Value Minimum Maximum
Accuracy Integer 1 1 4
RSSI Calibration Integer -10 dB -40 dB 40 dB
Spillage Factor Positive Integer 2 2 3
Min Attenuation Factor Real 2 1.6 4
Max Attenuation Factor Real 2 1.6 4
Alpha Real -4 Not applicable Not applicable
Beta Real 0.08 Not applicable Not applicable
Table 2 Application Level Parameters
Application Level
Parameters
Data Type Default Value Minimum Maximum
Coverage Estimation
Thresholds
Integer
-40, -50, -55, -60
dBm
-100 dBm -10 dBm
Sensor Detection
Threshold
Integer -85 dBm -150 dBm -20 dBm
Sensor Redundancy Integer 1 1 10
Sensor Prevention
Thresholds
Integer
-65, -60, -55 dBm
(low<medium<high)
-150 dBm -20 dBm
Device Transmit Power Integer 13 0 20
Channel View Threshold Integer -85 dBm -150 dBm -20 dBm
AP Redundancy Integer 1 1 10
Inadditiontotheseparameters,Planneralsohasthefollowingapplicationlevelparameters:
1 RegionSettingsinToolsÆSettingsÆPreferencesÆAPViews
2 DefaultAccessPointSettings
3 AutoChannelSelect
4 ‘Donotshowthiswindowagain’messages
5 ColorPalettes
6 ReportBaseFolder
Note:Thedefaultinstallationvalues
areselectedwhenyouinstallanewversionofPlanner.