User's Manual

MenuandToolbarOptions

3Com®AirProtectPlannerUserGuide

• Add:ClicktoaddanewmaterialtothelistofmaterialsintheGlobalRepository.TheMaterialPropertiesdialogbox

appears.RefertosectionAddingaMaterial

formoreinformation. 

• View:Clicktoviewmaterialpropertiesofamaterialinthefactorydefaultlist.TheMaterialPropertiesdialogbox

appears.However,thefieldsinthisdialogboxaredisabled,andread‐only.

• Modify:Clicktomodifymaterialpropertiesofamaterialthatyouhavedefined.TheMaterialPropertiesdialogbox

appearswhereyoucanmakethe desiredchanges.

Note:<View>isreplacedby<Modify>whenyouselectauser‐definedmaterial.

• Delete:Clicktodeleteauser‐definedmaterial.Aconfirmationmessageappearsaskingifyouwanttodeletethe

material.

• RestoreToDefault:Clicktorestorethelisttofactorydefaults.Thisactionremovesalltheuser‐definedmaterialsand

retainsonlythedefaultmaterials.

• ImportfromLocalRepository:ClicktoimportmaterialsfromtheLocalMaterialRepository.

• Close:Clicktoclosethisdialogbox.

5.4.2 LocalMaterialRepository

TheLocalMaterialRepositoryisamaterialobjectlibraryofPlanner,whichgivesalistofAvailableMaterialsintheLocal

Repositoryofthat.spmfile.Allthelocalmaterialsarestoredinthe.spmfileandvisibleonlyinthat.spmfile.

TheLocalMaterialRepositoryfeatureisavailableonly

foranIndoorlayoutandnotforanoutdoorlayout.

ToviewtheLocalMaterialRepository,gotoToolsÆLocationPropertiesÆLocalMaterialRepository.

Figure 38. Local Material Repository Tab

YoucanperformthefollowingfunctionsfromtheLocalMaterialRepositorydialogbox: