User's Manual

DevicePlacementontheLayoutModel
3Com®AirProtectPlannerUserGuide
82
7.2.10 CalibrationView
Thisviewdisplaysapredefinedsetofpointswhereyouneedtocollectsignalstrength.Thesepredefinedsetofpointsare
calledsystemgeneratedpointsandtheplacementofthesepointsdependsonvariousfactorslikelocationoffloorobjects,their
materialtype,andsoon.Thisviewhelpsyoufinetunethecurrentpredictionsclosertoreallifevalues.Forthis,Plannerneeds
tocollectsignalstrengthvaluesatvariousplaces.
Note:CalibrationViewisnotavailableforoutdoorplanning.
Figure 103. Calibration View: Indoor Layout
Totakereadings,movetoalocationontheflooranddouble‐clickthelocationpoint.Plannerwillautomaticallycollectthe
signalstrengthandaverageitoveraperiodforstablereadings.Youcanalsotakereadingsatanylocationbyright‐clicking
thatpointandselecting<TakeReading>.