User's Manual

DevicePlacementontheLayoutModel
3Com®AirProtectPlannerUserGuide
85
Figure 108. Spillage View
Note:TheSpillageViewoptionisavailableonlyintheAPCoverageView,SensorCoverageView,andSensorThreatView.
7.3.8 SelectingProtocols
Plannerallowsyoutoselectprotocols.Youcantryvarious‘What‐If’scenariosusingcombinationsofprotocolsandWLAN
devices.Youcanselectthefollowing:
• 802.11a,802.11b,802.11g,802.11a/n,or802.11b/g/nprotocols
• AnisolatedviewoftheselectedWLANdevices
Theviewchangesaccordingtotheselectedprotocol.If
youselectmorethanoneprotocol,Plannershowsallthoseprotocols
simultaneously.Selectingmorethanoneprotocolcansometimesleadtomissingdetailsforaspecificprotocolbecauseof
overlap.
UsingtheFilterdialogbox,youcanviewthecoverageofadeviceaboveandbelowthecurrentfloor.The
dialogboxalso
displaysdetailslikethenameofthedevice,thenameofthelayoutwherethedeviceislocated,andthelevel.
Usethefollowingstepstoselecttheprotocols.
1 Click
fromtheToolbar. 
2 SelectthedesiredprotocolanddeviceintheFiltersdialogbox.
3 Click<Apply>.