Command Reference Guide

omniusers
adds or removes Application Recovery Manager users to or from an existing
Application Recovery Manager user group, or lists the configured Application
Recovery Manager users. It enables you to use all GUI functionality on a Cell Manager
platform on which the GUI is not available, using a GUI installed on another system.
omniusers
SYNOPSIS
omniusers -version | -help
omniusers -add -type {U | W} -usergroup DPUserGroup -name UserName
-group GroupOrDomainName -client ClientName [-desc Description]
omniusers -remove -name UserName -group GroupOrDomainName -client
ClientName
omniusers -list
DESCRIPTION
The command adds, removes or lists the configured Application Recovery Manager
users on the Cell Manager where it is run. It does not create or remove user groups.
Use the command to create a remote Application Recovery Manager user on those
Cell Manager platforms on which Application Recovery Manager GUI is not
supported. You can then use the created user account to start the Application Recovery
Manager GUI on another system with the Application Recovery Manager GUI
installed, and connect to the Cell Manager.
OPTIONS
-version
Displays the version of the omniusers command.
-help
Displays the usage synopsis for the omniusers command.
-add
Adds a user to the specified Application Recovery Manager user group.
-remove
Removes a user from its Application Recovery Manager user group.
-name UserName
Command line interface reference 89