Datasheet

HP LTO-2 Ultrium Bar Code label pack Q2002A
HP LTO-3 Ultrium RW Bar Code label pack Q2007A
HP LTO-3 Ultrium WORM Bar Code label pack Q2008A
HP LTO-4 Ultrium RW Bar Code label pack Q2009A
HP LTO-4 Ultrium WORM Bar Code label pack Q2010A
HP LTO-5 Ultrium RW Bar Code Label Pack Q2011A
HP LTO-5 Ultrium WORM Bar Code Label Pack Q2012A
HP LTO-5 Ultrium WORM Bar Code Label Pack Q2012A
MP = Metal particle BaFe = Barium Ferrite
Key Features & Benefits Up to 6.25 TB compressed capacity on HP StoreEver and non-HP LTO-6 devices.
Supports transfer speeds of 160 MB/s (native), 400 MB/s (2.5:1) with Generation 6
Two different media options: Metal Particle (MP) and Barium Ferrite (BaFe) in both Metal Particle
and WORM formats
Unique colored cartridges to assist with identification in mixed media environments.
Superior 'smart grabber' mechanism and mechanical interlock to prevent the leader pin from being
pulled inside the tape housing (a key weakness of DLT media). Sensors detect proper connection
and prevent leader loss that would ruin the tape.
Simplified tape path to reduce wear and tear.
Very low media cost per GB.
LTO cartridge memory in media to improve access time and provide enhanced media monitoring.
Durable cartridge designed to minimize wear and debris (important in automation).
Tested to extremes in HP's media laboratory, to a level of specification unique to Hewlett-Packard.
Many of the test procedures required for HP Brand qualification (e.g. load/unload, shoeshine, drop
testing and environmental stress testing) are not required for the Ultrium logo.
HP LTO-6 offers data encryption for enhanced data security - granted FIPS140-2 Level 1
certification
HP offers both labeled (Custom Labeled and Non-Custom Labeled) and non-labeled Tri Optic and
RFID data cartridges.
Custom labeled offerings allow automation customers the ability to customize their label to their
specific needs. This includes the ability to define the barcode label type and to specify an exact label
sequence. Custom labels are pre-attached to the media before shipment. Available in Europe and
the USA. Europe requires a Minimum Order Quantity of 5 units or 100 total data cartridges (5 units X
20 cartridges).
HP Non-Custom Labeled media allows automation customers the ability to receive labeled media
without having to wait for a custom labeled solution. Barcode sequences are pre-determined by HP
and are guaranteed to be unique. LTO-1 and LTO-2 products utilize the double barcode format
whereas products from LTO-3 onwards utilize the single barcode format. HP Non-Custom Labeled
media is available worldwide.
HP LTO Ultrium RFID Storage Media provides a faster, more flexible and secure alternative to
traditional barcode identification solutions. Rewritable RFID labels enable cartridges to be
accurately tracked in real time, anywhere in the world. HP RFID labels are tested to extremes,
support worldwide radio frequencies and comply with global data security standards.
All labeled solutions are shipped in 20 packs.
QuickSpecs
HP Ultrium Media
Overview
DA - 11529 EMEA — Version 19 — May 13, 2013 Page 3