Cisco Nexus B22 Fabric Extender for HP Getting Started Guide

16
Cisco Nexus B22 Fabric Extender for HP Getting Started Guide
Configuring the Cisco Nexus B22 Fabric Extender for HP
This example shows how to display diagnostic test results for a specific Fabric Extender unit:
switch(config-fex)# show diagnostic result fex 100
FEX-100: Fabric Extender 16x10GE + 8x10G Module SerialNo : FOC1514256S
Overall Diagnostic Result for FEX-100 : OK
Test results: (. = Pass, F = Fail, U = Untested)
TestPlatform:
0) SPROM: ---------------> .
1) Inband interface: ---------------> .
2) Fan: ---------------> .
3) Power Supply: ---------------> .
4) Temperature Sensor: ---------------> .
Eth 1 2 3 4 5 6 7 8
Port -------------------------
. . . . . . . .
Eth 9 10 11 12 13 14 15 16
Port ------------------------
. . . . . . . .
TestFabricPorts:
Fabric 1 2 3 4 5 6 7 8
Port -------------------------
. . . . . . . .
switch(config-fex)#
This example shows how to display the environment status for a specific Fabric Extender unit:
switch(config-fex)# show environment fex 100
Temperature Fex 100:
-----------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
-----------------------------------------------------------------
1 Outlet-1 85 75 39 ok
1 Outlet-2 85 75 48 ok
1 Inlet-1 85 75 36 ok
1 Inlet-2 85 75 27 ok
1 Die-1 110 105 55 ok
switch(config-fex)#
This example shows how to display the SPROM for a specific Fabric Extender unit:
switch(config-fex)# show sprom fex 100 all
DISPLAY FEX 100 SUP sprom contents
Common block:
Block Signature : 0xabab
Block Version : 3
Block Length : 160
Block Checksum : 0x1860
EEPROM Size : 65535
Block Count : 3
FRU Major Type : 0x6002
FRU Minor Type : 0x0
OEM String : Cisco Systems, Inc.
Product Number : N2K-B22HP-P
Serial Number : FOC1514256S
Part Number : 73-13780-05
Part Revision : 02
Mfg Deviation : 0
H/W Version : 0.501
Mfg Bits : 0
Engineer Use : 0