Cisco Nexus B22 Fabric Extender for HP Getting Started Guide

Additional Information

Figure 6 Identifying LEDs

2. Check the LEDs and refer to the indicators described in the following table.

Note You need an OA version of 3.3.

Note For HP Integrity Superdome 2, the minimum F/W bundle is 2.51.102

Additional Information

For more information on the association between the server mezzanine bays and the enclosure

interconnect bays, see the setup and installation guide provided with your enclosure. For more

information see the HP websites:

• http://www.hp.com/go/bladesystem/interconnects

• http://www.hp.com/go/bladesystem/documentation

• http://www.hp.com/go/Integrity_Servers-docs

The location where you install the mezzanine card determines where you need to install the interconnect

modules such as the Cisco Nexus B22 Fabric Extender for HP.

Figure 7 shows the external ports for the Cisco Nexus B22 Fabric Extender for HP.

310170

1 UID LED

2 Health LED

Item Description Indicators

1 UID LED—Helps the user locate a

specific module in the BladeSystem,

such as for replacement.

Off

2 Health LED—Indicates normal

operation.

Steady green light