Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(52)SE

OL-19714-01

System Requirements

Caution The Cisco Catalyst Blade Switch 3120 for HP switch modules do not support switch stacks with other

types of blades switches as members. Combining the Cisco Catalyst Blade Switch 3120 for HP with

other types of blade switches in a switch stack might cause the switch to work improperly or to fail.

Device Manager System Requirements

These sections describe the hardware and software requirements for using the device manager:

• Hardware Requirements, page 3

• Software Requirements, page 4

Hardware Requirements

Table 2 lists the minimum hardware requirements for running the device manager.

Cisco X2 transceiver modules

(supported only on the

CBS3120X-S model)

X2-10GB-SR V02 or later

X2-10GB-CX4 V03 or later

X2-10GB-LRM V03 or later

X2-10GB-LX4 V03 or later

10 Gigabit Ethernet X2 ZR optical modules

Cisco IOS Release 12.2(40)EX1

Cisco IOS Release 12.2(50)SE

Cisco TwinGig Converter Module Dual SFP

X2 converter module to allow the switch

to support SFP Gigabit Ethernet modules

Cisco IOS Release 12.2(40)EX1

SFP modules 1000BASE-LX/LH

1000BASE-SX

1000BASE-T

SFP-10G-SR

SFP-10G-LR

Cisco IOS Release 12.2(40)EX1

Cisco IOS Release 12.2(50)SE

1. X2 module supported only on the CBS3120X-S model

2. SFP = small form-factor pluggable

Table 1 Cisco Catalyst Blade Switch 3120 for HP Supported Hardware (continued)

Switch Hardware Description

Supported by Minimum Cisco IOS

Release

Table 2 Minimum Hardware Requirements

Processor Speed DRAM Number of Colors Resolution Font Size

233 MHz minimum

1. We recommend 1 GHz.

512 MB

2. We recommend 1-GB DRAM.

256 1024 x 768 Small