Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(52)SE

OL-19714-01

Documentation Updates

Error Message DOT1X_SWITCH-5-ERR_VLAN_EQ_VVLAN: Data VLAN [dec] on port [chars]

cannot be equivalent to the Voice VLAN AuditSessionID [chars]

Explanation

An attempt was made to assign a data VLAN to an IEEE 802.1x port that is the same as

the voice VLAN. [dec] is the VLAN, the first [chars] is the port, and the second [chars] is the session

ID.

Recommended Action Change either the voice VLAN or the IEEE 802.1x-assigned VLAN on the

interface so that they are not the same.

Error Message DOT1X_SWITCH-5-ERR_VLAN_INTERNAL: Attempt to assign internal VLAN

[dec] to 802.1x port [chars] AuditSessionID [chars]

Explanation

An attempt was made to assign an invalid VLAN to an IEEE 802.1x port. The VLAN

specified is used internally and cannot be assigned to this port. [dec] is the VLAN, the first [chars]

is the port, and the second [chars] is the session ID.

Explanation Assign a different VLAN.

Error Message DOT1X_SWITCH-5-ERR_VLAN_INVALID: Attempt to assign invalid VLAN [dec]

to 802.1x port [chars] AuditSessionID [chars]

Explanation

An attempt was made to assign an invalid VLAN to an IEEE 802.1x port. The VLAN

specified is out of range. [dec] is the VLAN, the first [chars] is the port, and the second [chars] is

the session ID.

Recommended Action Update the configuration to use a valid VLAN.

Error Message DOT1X_SWITCH-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent or

shutdown VLAN [chars] to 802.1x port [chars] AuditSessionID [chars]

Explanation

An attempt was made to assign a VLAN to an IEEE 802.1x port, but the VLAN was not

found in the VLAN Trunking Protocol (VTP) database. [dec] is the VLAN, the first [chars] is the

port, and the second [chars] is the session ID.

Recommended Action Make sure the VLAN exists and is not shutdown or use another VLAN.

These messages have been deleted:

Error Message DOT1X-4-MEM_UNAVAIL: Memory was not available to perform the 802.1X

action.

Explanation

The system memory is not sufficient to perform the IEEE 802.1x authentication.

Recommended Action Reduce other system activity to reduce memory demands.