Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(52)SE

OL-19714-01

Documentation Updates

Error Message DOT1X_SWITCH-5-ERR_SPAN_DST_PORT: Attempt to assign VLAN [dec] to

802.1x port [chars], which is configured as a SPAN destination

Explanation

An attempt was made to assign a VLAN to an IEEE 802.1x port that is configured as a

Switched Port Analyzer (SPAN) destination port. [dec] is the VLAN, and [chars] is the port.

Recommended Action Change the SPAN configuration so that the port is no longer a SPAN

destination port, or change the configuration so that no VLAN is assigned.

Error Message DOT1X_SWITCH-5-ERR_VLAN_EQ_MDA_INACTIVE: Multi-Domain Authentication

cannot activate because Data and Voice VLANs are the same on port [chars]

Recommended Action

Multi-Domain Authentication (MDA) host mode cannot start if the configured

data VLAN on a port is the same as the voice VLAN. [chars] is the port.

Recommended Action Change either the voice VLAN or the access VLAN on the interface so that

they are not the same. MDA then starts.

Error Message DOT1X_SWITCH-5-ERR_VLAN_EQ_VVLAN: Data VLAN [dec] on port [chars]

cannot be equivalent to the Voice VLAN.

Explanation

An attempt was made to assign a data VLAN to an IEEE 802.1x port that is the same as

the voice VLAN. [dec] is the VLAN, and [chars] is the port.

Recommended Action Change either the voice VLAN or the IEEE 802.1x-assigned VLAN on the

interface so that they are not the same.

Error Message DOT1X_SWITCH-5-ERR_VLAN_INTERNAL: Attempt to assign internal VLAN

[dec] to 802.1x port [chars]

Explanation

An attempt was made to assign an invalid VLAN to an IEEE 802.1x port. The VLAN

specified is used internally and cannot be assigned to this port. [dec] is the VLAN, and [chars] is the

port.

Recommended Action Assign a different VLAN.

Error Message DOT1X_SWITCH-5-ERR_VLAN_INVALID: Attempt to assign invalid VLAN [dec]

to 802.1x port [chars]

Explanation

An attempt was made to assign an invalid VLAN to an IEEE 802.1x port. The VLAN

specified is out of range. [dec] is the VLAN, and [chars] is the port.

Recommended Action Update the configuration to use a valid VLAN.