Release Notes for Cisco Catalyst Blade Switch 3120 for HP, Cisco IOS Release 12.2(52)SE

OL-19714-01

Documentation Updates

Error Message DOT1X_SWITCH-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent or

shutdown VLAN [dec] to 802.1x port [chars]

Explanation

An attempt was made to assign a VLAN to an IEEE 802.1x port, but the VLAN was not

found in the VLAN Trunking Protocol (VTP) database. [dec] is the VLAN, and [chars] is the port.

Recommended Action Make sure that the VLAN exists and is not shut down, or use another VLAN.

Error Message DOT1X_SWITCH-5-ERR_VLAN_ON_ROUTED_PORT: Dot1x cannot assign a VLAN

[dec] to a routed port [chars]

Explanation

An attempt was made to assign a VLAN to a supplicant on a routed port, which is not

allowed. [dec] is the VLAN ID and [chars] is the port.

Recommended Action Either disable the VLAN assignment, or change the port type to a nonrouted

port.

Error Message DOT1X_SWITCH-5-ERR_VLAN_PROMISC_PORT: Attempt to assign VLAN [dec] to

promiscuous 802.1x port [chars]

Explanation

An attempt was made to assign a VLAN to a promiscuous IEEE 802.1x port, which is

not allowed. [dec] is the VLAN, and [chars] is the port.

Recommended Action Change the port mode so that it is no longer a promiscuous port, or change the

configuration so that no VLAN is assigned.

Error Message DOT1X_SWITCH-5-ERR_VLAN_RESERVED: Attempt to assign reserved VLAN

[dec] to 802.1x port [chars]

Explanation

An attempt was made to assign an invalid VLAN to an IEEE 802.1x port. The VLAN

specified is a reserved VLAN and cannot be assigned to this port. [dec] is the VLAN, and [chars] is

the port.

Recommended Action Assign a different VLAN.

Error Message DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN [dec] to

802.1x port [chars]. 802.1x is incompatible with RSPAN

Explanation

This message means that remote SPAN should not be enabled on a VLAN with

IEEE 802.1x-enabled. [dec] is the VLAN, and [chars] is the port.

Recommended Action Either disable remote SPAN configuration on the VLAN, or disable

IEEE 802.1x on all the ports in this VLAN.