Setup and Install

HP MultiSeat Solution
Tips for using HP Classroom Manager with an HP
MultiSeat Computing Solution
www.hp.com/go/hpclassroommanager
12. On the Conditions dialog, select Path as the primary condition and
click Next.
13. Select Browse Files... and select the HP Classroom Manager Tutor
which is by default installed as follows:
C:\Program Files(x86)\HP\HP Classroom Manager\pcinssui.exe
14. Click Next
15. On the Exceptions dialog, click next as no exceptions are required.
16. On the Name and Description dialog, provide a suitable name and
optionally a description to identify this rule.
17. Select Create.
18. To ensure that important system files will be allowed to run,
Applocker may prompt to create the default rules. Select Yes to
create the default rules.
19. The Local Policy Editor should now create the Default Rules and
the Rule to Block Access to the HP Classroom Manager Tutor for
the selected group.
20. To enable AppLocker, you must set the Application Identity Service
to run automatically.
21. You may want to apply a similar rule to block access to the HP Classroom Manager Student Configurator. Repeat the steps above changing
references to the HP Classroom Manager Tutor application to the HP Classroom Manager Student Configurator application which is by
default installed as follows:
C:\Program Files(x86)\HP\HP Classroom Manager\pcicfgui.exe.