Operation Manual

Load Trays 2, 3, 4, and 5
Introduction
The following information describes how to load paper in Tray 2 and the optional 550-sheet trays (Trays 3, 4,
and 5; part number B5L34A). These trays hold up to 550 sheets of 75 g/m
2
(20 lb) paper.
NOTE: The procedure to load paper for the optional 550-sheet trays is the same as for Tray 2. Only Tray 2 is
shown here.
1. Open the tray.
NOTE: Do not open this tray while it is in use.
2. Before loading paper, adjust the paper guides by squeezing
the adjustment latches and sliding the guides to the size of
the paper being used.
22 Chapter 2 Paper trays ENWW