Operation Manual

3. Load paper into the tray. Check the paper to verify the guides
lightly touch the stack, but do not bend it. For information
about how to orient the paper, see
Trays 2, 3, 4, and 5 paper
orientation on page 24.
NOTE: To prevent jams, adjust the paper guides to the
correct size and do not overfill the tray. Be sure that the top
of the stack is below the tray full indicator.
4. Close the tray.
5. The tray configuration message displays on the product
control panel.
6. If the paper size and type shown is not correct, select Modify
to choose a different paper size or type.
For custom-size paper, specify the X and Y dimensions for the
paper when the prompt displays on the product control panel.
Y
X
ENWW Load Trays 2, 3, 4, and 5 23