Operation Manual

3. Click the Job Storage tab.

4. Select a Job Storage Mode option.

●

Proof and Hold: Print and proof one copy of a job, and then print more copies.

●

Personal Job: The job does not print until you request it at the product control panel. For this job-

storage mode, you can select one of the Make Job Private/Secure options. If you assign a

personal identification number (PIN) to the job, you must provide the required PIN at the control

panel. If you encrypt the job, you must provide the required password at the control panel.

●

Quick Copy: Print the requested number of copies of a job and store a copy of the job in the

product memory so you can print it again later.

●

Stored Job: Store a job on the product and allow other users to print the job at any time. For this

job-storage mode, you can select one of the Make Job Private/Secure options. If you assign a

personal identification number (PIN) to the job, the person who prints the job must provide the

required PIN at the control panel. If you encrypt the job, the person who prints the job must

provide the required password at the control panel.

5. To use a custom user name or job name, click the Custom button, and then enter the user name or the

job name.

Select which option to use if another stored job already has that name:

●

Use Job Name + (1-99): Append a unique number to the end of the job name.

●

Replace Existing File: Overwrite the existing stored job with the new one.

6. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK