Operation Manual

Print from the USB port
Introduction
This product features easy-access USB printing, for quickly printing files without sending them from a
computer. The product accepts standard USB flash drives in the USB port near the control panel. It supports
the following types of files:
●
.pdf
●
.prn
●
.pcl
●
.ps
●
.cht
Enable the USB port for printing
The USB port is disabled by default. Before using this feature, enable the USB port. Use one of the the
following procedures to enable the port:
Enable the USB port from the product control-panel menus
1. Press the Home
button on the product control panel.
2. Open the following menus:
●
Administration
●
General Settings
●
Enable Retrieve from USB
3. Select the Enabled option, and then touch the Save button or press the OK button.
Enable the USB port from the HP Embedded Web server (network-connected products only)
1. Open the HP Embedded Web Server (EWS):
a. 4-line control panels: View the control-panel display to see the IP address.
Touchscreen control panels: From the Home screen on the product control panel, touch the
Network
button to display the IP address or host name.
54 Chapter 4 Print ENWW