Operation Manual

b. Open a Web browser, and in the address line, type the IP address or host name exactly as it
displays on the product control panel. Press the Enter key on the computer keyboard. The EWS
opens.
NOTE: If the Web browser displays a There is a problem with this website’s security certificate
message when attempting to open the EWS, click Continue to this website (not recommended).
Choosing Continue to this website (not recommended) will not harm the computer while
navigating within the EWS for the HP product.
2. Open the Print tab.
3. On the left side of the screen, click Retrieve from USB Setup.
4. Select the Enable Retrieve from USB check box.
5. Click Apply.
Print USB documents
1. Insert the USB flash drive into the easy-access USB port.
NOTE: The port might be covered. For some products, the cover flips open. For other products, pull
the cover straight out to remove it.
2. The product detects the USB flash drive. Touch or press the OK button to access the drive, or, if
prompted, select the Retrieve from USB option from the list of available applications. The Retrieve from
USB screen opens.
3. Select the name of the document to print.
NOTE: The document might be in a folder. Open folders as necessary.
4. To adjust the number of copies, select Copies, and then use the keypad to change the number of copies.
5. Touch the Start
button or press the OK button to print the document.
ENWW Print from the USB port 55