Operation Manual

Table 5-5 HP Embedded Web Server Security tab (continued)
Menu Description
Web Service Security Allow resources on this product to be accessed by web pages from different domains. If
no sites are added to the list, then all sites are trusted.
Self Test Verify that the security functions are running according to expected system parameters.
HP Web Services tab
Use the HP Web Services tab to configure and enable HP Web Services for this product. It is necessary to
Enable HP Web Services to use the HP ePrint feature.
Table 5-6 HP Embedded Web Server Networking tab
Menu Description
Web Services Setup Connect this product to HP Connected on the Web by enabling HP Web Services.
Web Proxy Configure a proxy server if there are issues enabling HP Web Services or connecting the
product to the Internet.
HP-ePrint Debugging Enable features for solving problems with connecting to HP ePrint services.
Networking tab
Use the Networking tab to configure and secure network settings for the product when it is connected to an
IP-based network. This tab does not display if the product is connected to other types of networks.
Table 5-7 HP Embedded Web Server Networking tab
Menu Description
TCP/IP Settings Configure TCP/IP settings for IPv4 and IPv6 networks.
NOTE: The configuration options available depend on the print server model.
Network Settings Configure IPX/SPX, AppleTalk, DLC/LLC, and SNMP settings, depending on the print
server model.
Other Settings Configure general printing protocols and services supported by the print server. The
available options depend on the print server model, but can include firmware update,
LPD queues, USB settings, support information, and refresh rate.
AirPrint Enable, set up, or disable network printing from Apple supported products.
Select Language Change the language displayed by the HP Embedded Web Server. This page displays if
the Web pages support multiple languages. Optionally, select supported languages
through language-preference settings in the browser.
Settings View and restore current security settings to factory-default values.
Configure security settings using the Security Configuration Wizard.
NOTE: Do not use the Security Configuration Wizard to configure security settings
using network-management applications, such as HP Web Jetadmin.
62 Chapter 5 Manage the product ENWW