Operation Manual

Configure IP network settings

●

Printer sharing disclaimer

●

View or change network settings

●

Rename the product on a network

●

Manually configure IPv4 TCP/IP parameters from the control panel

●

Manually configure IPv6 TCP/IP parameters from the control panel

●

Link speed and duplex settings

Printer sharing disclaimer

HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems

and not of the HP printer drivers. Go to Microsoft at

www.microsoft.com.

View or change network settings

Use the HP Embedded Web Server to view or change IP configuration settings.

1. Open the HP Embedded Web Server (EWS):

a. 4-line control panels: View the control-panel display to see the IP address.

Touchscreen control panels: From the Home screen on the product control panel, touch the

Network

button to display the IP address or host name.

b. Open a Web browser, and in the address line, type the IP address or host name exactly as it

displays on the product control panel. Press the Enter key on the computer keyboard. The EWS

opens.

NOTE: If the Web browser displays a There is a problem with this website’s security certificate

message when attempting to open the EWS, click Continue to this website (not recommended).

Choosing Continue to this website (not recommended) will not harm the computer while

navigating within the EWS for the HP product.

2. Click the Networking tab to obtain network information. Change settings as needed.