Operation Manual

Economy settings
Introduction
●
Optimize speed or energy usage
●
Set the sleep timer and configure the product to use 1 watt or less of power
Optimize speed or energy usage
By default the product stays warm between jobs to optimize speed and print the first page of jobs faster. To
conserve energy, set the product to cool between jobs. The product has four incremental settings to optimize
for speed or energy usage.
1. Press the Home
button on the product control panel.
2. Open the following menus:
●
Administration
●
General Settings
●
Energy Settings
●
Optimum Speed/Energy Usage
3. Select the option that you want to use, and then touch the Save button or press the OK button.
NOTE: The default setting is Faster first page.
Set the sleep timer and configure the product to use 1 watt or less of power
The product has several options for the energy-saving sleep timer feature. The time delay to enter the Sleep/
Auto Off state is adjustable, and the power usage during the Sleep/Auto Off state varies according to
selection for the Wake/Auto On option.
1. Press the Home
button on the product control panel.
2. Open the following menus:
●
Administration
●
General Settings
●
Energy Settings
●
Sleep Timer Settings
3. 4-line control panels only: Select Sleep/Auto Off Timer, and then select Enabled. Press the OK button.
4. Select Sleep /Auto Off After.
5. Use the keypad to enter the appropriate time period, and then touch the Save button, or press the OK
button.
NOTE: The sleep-mode default time is 1 minute.
6. Select one of the Wake/Auto On to These Events options:
72 Chapter 5 Manage the product ENWW