HP J1473A 4-port, J1474A 8-port, J1475A Console Switch Rackmount Owner's Manual

www.hp.com/racksolutions

connect anything to the connector on the rear of the Expansion Box.)

4. Connect the Category 5 cable to the modular jack on the rear of the

Expansion Box.

5. Connect the circular power plug from the included power supply to the

power port on the Expansion Box. Then plug the power supply into a conve-

nient electrical outlet. (See the table on the following page for additional

power cord information.) Verify that the Expansion Box’s POWER light is

now lit.

Installation