HP J1473A 4-port, J1474A 8-port, J1475A Console Switch Rackmount Owner's Manual

www.hp.com/racksolutions

Games

Hewlett Packard Console Switch

Administrator Command Menu

Add Port

Edit Port

Delete Port

Administrative Functions

Scanning is OFF

Reset Standard Mse/Kbd

Reset Wheel Mse/Kbd

Version Information

ENTER = activate

ESC = exit

Once you have activated the main OSD Window, you can open the Command

Menu by pressing either of the Ctrl keys twice.

The Command Menu options are selected in the same manner as ports in the

OSD Window. Scroll the Highlight Bar up and down and press Enter when

your selection is highlighted.

The Command

THE COMMAND MENU

On-Screen Display Operations

If you are operating in non-secure mode or are the system administrator, you’ll

have several options that are not in the User level Command Menu. Add Port, Edit

Port, Delete Port and Administrator Functions are covered in separate sections in

this chapter. Scanning is covered in Chapter 6.

If you experience a loss of mouse signal while using the Rackmount Console

Switch, select the ‘Reset Standard Mouse/Keyboard’ option from this menu for

a server with a standard mouse driver or ‘Reset Wheel Mouse/Keyboard’ if you are

using a server with a Microsoft IntelliMouse or other wheel mouse driver. This will

reset and in most cases restore your mouse signal. These commands are equivalent

to the <CM>MR<Enter> and <CM>MW<Enter> keyboard commands listed in

the ‘System Control & Maintenance’ section of this manual.

Choose the option ‘Version Information’ to display on your monitor the current

version level of your Rackmount Console Switch ﬁ rmware. Press the Esc key to

clear this information from your screen.