HP J1473A 4-port, J1474A 8-port, J1475A Console Switch Rackmount Owner's Manual

www.hp.com/racksolutions
21
Editing Port Names and Addresses
1. Highlight the port you wish to change in the main OSD Window.
2. Press the Ctrl key twice to access the Command Menu or press the F2 key once.
(If you press F2 skip Step 3)
3. Select ‘Edit Port’ from the Command Menu.
4. Enter the new port name, address, ID Dwell time and Scan Dwell time. Press
Enter to accept.
5. After selecting “ID Setup”, use the arrow keys, position the ID window to where
you would like it to appear when this port is selected. Then press Enter. (For
further information see ‘The ID Window’ later in this chapter.)
6. Select “Save Changes” and press Enter to accept.
Press Esc at any point to exit this operation without saving the changes.
Deleting an Existing Port
1. Highlight the port you wish to delete in the main OSD Window.
2. Press the Ctrl key twice to access the Command Menu or simply press the
DELETE key. (If you press DELETE skip Step 3)
3. Choose the ‘Delete Port’ option.
4. Type Y or N at the prompt to confi rm the deletion and press Enter.
On-Screen Display Operations