HP J1473A 4-port, J1474A 8-port, J1475A Console Switch Rackmount Owner's Manual

Rackmount Console Switch Owner’s Manual

www.hp.com/racksolutions

Operation Procedure

Move the ID Window Use the arrow keys or mouse to move the ID

Window's position on the monitor. (Hold down

the SHIFT key to move faster.) If the window ﬂ ick-

ers but does not move, continue tapping the arrow

keys until it moves back into range.

Change window background color Press the <PAGE UP> key to cycle through the

available window background colors.

Change text color Press the <PAGE DOWN> key to cycle through

the available text colors.

Change window length Use the (+) and (-) keys to change the length of

the ID Window.

Change window size Press SPACE to toggle between large and small.

ID Window Help Press F1

The ID Window appears when you change ports and displays the name of the

selected port. This window can be individually conﬁ gured for each port in your

system. The characteristics of the ID Window can be changed from the Edit Port

Menu. This option is only available if you are operating in non-secure mode or if

you are the system administrator.

Changing the Size, Color and Position of the ID Window

1. Highlight the port you wish to change in the main OSD Window.

2. From the main OSD Window, press the Ctrl key twice to access the Command

Menu or press F3. (If you press F3 skip Step 3)

3. Select ‘Edit Port’ from the Command Menu.

4. Choose the option ‘ID Setup.’

Follow the procedures outlined in the table below to change the size, color or

position of your ID Window.

The ID Window