Storage Resource Manager Enterprise Edition Installation Guide

5–12 Storage Resource Manager Enterprise Edition
Modifying Installation Settings
NOTE: The directories in this procedure are examples and might differ from your OpenVMS
systems.
1. Depending on your OpenVMS system, enter one of the following commands at
the OpenVMS system prompt in the directory where you downloaded the SRM
OpenVMS Agent:
product remove srm_axp (for an Alpha system)
or
product remove srm_vax (for a VAX system)
The following message appears:
The following product has been selected:
CPQ AXPVMS SRM_AXP V4.2-3 Layered Product
or
CPQ VAXVMS SRM_VAX V4.2-3 Layered Product
Do you want to continue? [YES]
2. Press Enter. The following message appears:
The following product will be removed from destination:
CPQ AXPVMS SRM_AXP V4.2-3 DISK$AXP071:[VMS$COMMON.]
Portion done: 0%...40%
SRM$AGENT Configuration Procedure
This procedure helps you define the parameters required to run
Compaq Storage Resource Manager Agent for OpenVMS on this
system.
Please select the TCP/IP stack running on this system:
1 - UCX or Digital TCP/IP Services
2 - TCPware
E - Exit SRM$AGENT configuration
3. Select the appropriate TCP/IP stack.
Enter Selection: [1] 1
The following message appears:
TCP/IP stack is UCX.
Press Return to continue.