Storage Resource Manager Enterprise Edition Installation Guide

Storage Resource Manager Enterprise Edition 6–7
Installing and Registering Plug-ins
5. Click Next. The Required Registration Information dialog box displays, as shown
in Figure 6–3.
Figure 6– 3: Required Registration Information dialog box
6. You must fill in all of the fields in this dialog box before you can continue to the
next step.
7. The following list describes each field:
• Host Name — The name of this field may be different depending upon the
type of object you are registering. In the sample dialog box shown above, this
field is labeled RAID Array's WWName (HSG80 NODE_ID). If you are
registering a SAN switch, the field label is TCP/IP Address.
For information about what to enter in this field, refer to the appropriate
section at the end of this chapter or to the Readme file included in the same
directory (on the CD-ROM) as the plug-in you want to register.