Storage Resource Manager Enterprise Edition Installation Guide

6–18 Storage Resource Manager Enterprise Edition
Installing and Registering Plug-ins
• Password — Enter the password for that user — it is kept encrypted in the SRM
database.
• Context — Enter the NDS context for that user. The context must be in the same
NDS tree as the NetWare server being scanned.
Enabling File System Scans
Although devices in this category are registered as managed computers with the SRM
Server, the file systems that are discovered during a computer scan cannot be scanned
until the user explicitly enables them for file system scans. The file system (volume)
scans of NetWare servers provide information about file system usage based on the
last NetWare user modification of files. To enable a volume scan, the SRM user with
the proper account privileges must perform the following procedure.
To enable file system scans:
1. Launch SRM.
2. Click the Resources tab, and then click the Computers notebook. The Managed
Computers Report dialog box displays.
3. In the Computer Name column, select the NetWare server for which you want to
enable scanning. The Single Computer Report dialog box displays.
4. Scroll down to the File Systems Report, and click Modify to change the scanning
enabled status of the file systems displayed in the table. The File System Scan
Settings dialog box displays.
5. In the Scanning Enabled column, choose the check boxes beside the file systems
that you want to scan.
6. Click the Submit button.
Compaq HSG80 Plug-In
This section provides additional information about installing and registering a
Compaq HSG80 Plug-In.
Plug-In Prerequisites
• The SRM 4.0B Windows NT/Windows 2000 Agent must be installed on the
computer that will act as an SRM proxy agent.