Storage Resource Manager Enterprise Edition Installation Guide

Storage Resource Manager Enterprise Edition 6–19
Installing and Registering Plug-ins
• The SRM Agent computer must contain a Fibre Channel controller that is
connected to the same Fibre Channel network as the Compaq HSG80-based
RAID subsystem with which you want to communicate.
• The SRM Agent computer must have a connection enabled to one or more LUNs
on the HSG80-based RAID subsystem.
NOTE: The command console LUN can be the LUN to which the SRM Agent computer
connection is enabled.
Before you Register this Plug-In
The Plug-In Registration Wizard prompts you for the following information; organize
it beforehand to save time:
• The enclosure Fibre Channel worldwide name (or NODE_ID) of the HSG80-
based RAID subsystem that you want to scan.
NOTE: To display the worldwide name of the enclosure, use the SHOW THIS command in the
RAID subsystem's command-line interface.
Using the Plug-In Registration Wizard
When registering a HSG80-based RAID subsystem with the SRM Server, provide the
following information in the Required Registration Information dialog box:
• RAID Array's WWName (NODE_ID) — Enter the worldwide name, using
hyphens, of the RAID subsystem (for example, 0000-0000-0000-AAAA).
• SRM Display Name — Enter the name of the RAID subsystem that you want to
be displayed in SRM reports. This name is arbitrary. It can be any name that has
meaning in your enterprise storage network.
If you successfully registered the HSG80-based RAID subsystem, it is located in the
group named RAID Group.
Editing Scan Proxy Information
Using SRM, you can edit the proxy system settings for a registered RAID subsystem.
This consists of changing the SRM Agent computer to use computer scans.
To edit scan proxy information:
1. Launch SRM.
2. Click the Options tab, and then click the Scans notebook.
3. In the navigation pane, click select proxy. The Select Proxy dialog box displays.